SMS Commands for Suntech ST410 Tracker

Introduction to SMS Commands for the Suntech ST410 Tracker

The Suntech ST410 tracker is a powerful tool for monitoring vehicles and assets, providing security and peace of mind to users. SMS commands are an efficient way to interact with the device, allowing you to perform various actions quickly and conveniently. In this guide, we will discuss when and how to use these commands, as well as the necessary prerequisites to ensure safe and effective operation.

To get started, it is essential that the device is properly configured and that you have access to the security password. Protecting the password is crucial, as it ensures that only authorized users can send commands to the tracker. We recommend periodically changing the password to enhance security and prevent unauthorized access.

Using SMS commands is ideal in situations where data connectivity may be limited or unavailable, providing a reliable alternative to manage and monitor your device. With the Suntech ST410, you will have the flexibility to communicate directly with the tracker, making your experience even more practical.

To optimize your tracking, consider the Trackar platform, which offers a one-time payment and advanced features to maximize the use of your device. Make the most of your Suntech ST410 and keep your assets always protected!

SMS Commands

1. Time Zone Configuration

The first step is to configure the device's time zone. It is essential that this configuration is done correctly to ensure that location data is accurate.

8960000w00

2. Update Interval with Ignition On

Set the tracker’s update time while the vehicle's ignition is on. The interval can be adjusted in seconds, with 60 seconds being the default for transmission while in motion.

8050000 60

3. Update Interval with Ignition Off

Configure the update time for when the ignition is off. The default is 3300 seconds, equivalent to 55 minutes, to ensure that the tracker continues to operate even when the vehicle is stationary.

8090000 3300

4. APN Configuration

It is crucial to configure the carrier's APN correctly, including user and password information, which may vary depending on the chip provider. Below are the commands for different APNs.

8030000 allcom.br

8030000 allcom.vivo.com.br

8030000 brt.br

8030000 claro.com.br

8030000 conect.algar.br

8030000 datatem.algar.br

8030000 eseye.com

8030000 gprs.amazoniacelular.com.br

8030000 gprs.oi.com.br

8030000 gprs.telemigcelular.com.br

8030000 jbgprs.algar.br

8030000 linksolutions.br

8030000 m2data.algar.br

8030000 m2data.arqia.br

8030000 m2data.vivo.com.br

8030000 m2m.vodafone.br

8030000 m2track.br,vivo,vivo#

8030000 meta.vivo.com.br

8030000 oktor.br

8030000 sercomtel.com.br

8030000 smart.m2m.vivo.com.br

8030000 ss.algar.br

8030000 tim.br

8030000 tmdata.tim.br

8030000 transmeet.br

8030000 up.m2m.vivo.com.br

8030000 virtueyes.vivo.com.br

8030000 voxter.algar.br

8030000 voxter.br

8030000 wap.ctbc.br

8030000 wl.vivo.com.br

8030000 y1.m2m.algar.com.br

8030000 zap.vivo.com.br

5. Activate GPRS Transmission

For the tracker to start sending information, it is necessary to activate GPRS transmission. This configuration is essential for communication between the tracker and the server.

7100000

6. Configure DNS and Port

Configuring the DNS and port is necessary to ensure that the tracker connects correctly to the server. It is recommended to use the same server for all entries.

8040000 central.trackar.com.br,5011

7. Activate Motion Alert

The motion alert can be configured to activate without the need for a key. The alert time is adjustable in minutes, allowing customization as needed.

1810000T180

Special commands

Special Commands

Here are some special commands that can be used to manage the tracker more efficiently.

rconf

Restart

Sleep0000 5

9400000

9410000

6690000

SLEEP0000 10

Reset

format