SMS Commands for Suntech ST-901 A+ Tracker

Introduction to SMS Commands for Suntech ST-901 A+ Trackers

The Suntech ST-901 A+ tracker is an advanced solution for vehicle monitoring, allowing users to perform various operations through SMS commands. These commands are ideal for situations where internet access is limited or when a more direct and quick control of the device is necessary. To use this functionality, it is essential for the user to be aware of the prerequisites, such as the proper configuration of the device and the use of an active SIM card with an SMS plan.

Additionally, security is a crucial aspect when sending commands via SMS. The Suntech ST-901 A+ tracker has a password system that protects its functionalities from unauthorized access. Therefore, it is essential to keep your password secure and always change it to a combination that is hard to guess. The conscious use of SMS commands not only maximizes the effectiveness of the tracker but also ensures the protection of your information.

For even more efficient management of your Suntech ST-901 A+ tracker, consider the Trackar platform, which offers a one-time payment solution to optimize your monitoring.

SMS Commands

1. Time Zone Configuration

The first step is to adjust the time zone of the tracker. This is essential to ensure that location data is accurate and synchronized with local time.

8960000w00

2. Update Time with Ignition On

The second step involves setting the update interval of the tracker while the vehicle's ignition is on. The time can be adjusted in seconds, and a common value is 60 seconds, indicating that the tracker will send data every minute.

8050000 60

3. Update Time with Ignition Off

Here, you should configure the update interval of the tracker while the ignition is off. An example would be an interval of 3300 seconds, which corresponds to 55 minutes.

8090000 3300

4. Carrier APN Configuration

It is essential to enter the correct APN information, including username and password, as they vary by carrier. Below are some examples of APN commands that can be used.

8030000 allcom.br

8030000 allcom.vivo.com.br

8030000 brt.br

8030000 claro.com.br

8030000 conect.algar.br

8030000 datatem.algar.br

8030000 eseye.com

8030000 gprs.amazoniacelular.com.br

8030000 gprs.oi.com.br

8030000 gprs.telemigcelular.com.br

8030000 jbgprs.algar.br

8030000 linksolutions.br

8030000 m2data.algar.br

8030000 m2data.arqia.br

8030000 m2data.vivo.com.br

8030000 m2m.vodafone.br

8030000 m2track.br,vivo,vivo#

8030000 meta.vivo.com.br

8030000 oktor.br

8030000 sercomtel.com.br

8030000 smart.m2m.vivo.com.br

8030000 ss.algar.br

8030000 tim.br

8030000 tmdata.tim.br

8030000 transmeet.br

8030000 up.m2m.vivo.com.br

8030000 virtueyes.vivo.com.br

8030000 voxter.algar.br

8030000 voxter.br

8030000 wap.ctbc.br

8030000 wl.vivo.com.br

8030000 y1.m2m.algar.com.br

8030000 zap.vivo.com.br

5. Activate GPRS Transmission

Activate GPRS data transmission so that the tracker can send location information and other relevant data. This step is crucial for the device's operation.

7100000

6. Configure DNS and Port

Set the DNS servers and the port that the tracker will use to connect to the internet. It is important to ensure that this data is correct for effective communication.

8040000 central.trackar.com.br,5015

7. Activate Movement Alert Without Key On

Activate the movement alert, which can be configured to send notifications when the vehicle moves without the ignition key. The adjustment time is set in minutes.

1810000T180

Special commands

Special Commands

In addition to the standard settings, there are special commands that can be used to manage the tracker. They include options to query settings, restart the hardware, activate sleep mode, lock and unlock the device, obtain location via SMS, and restore factory settings.

rconf

Restart

Sleep0000 5

9400000

9410000

6690000

SLEEP0000 10

Reset

format