SMS Commands for the MXT MXT-140 Tracker

Introduction to SMS Commands for the MXT-140 Tracker

The MXT-140 tracker from the MXT brand is a powerful tool for real-time monitoring and location tracking. One of the most practical features of this device is the ability to manage it via SMS commands. These commands allow users to perform various operations, such as checking the location, configuring operational parameters, and much more, all through simple text messages.

To use the SMS commands, it is necessary for the device to be properly configured and for the user to have access to the security password. This password is essential to ensure that only authorized individuals can send commands to the tracker, thus protecting your information and the privacy of the monitoring. It is recommended to change the default password and keep it in a secure place.

SMS commands are especially useful in situations where internet access is not available, or when quick and direct control is needed. With a simple message, the user can obtain valuable information about the location of the monitored vehicle or asset.

To maximize the efficiency of your MXT-140 tracker, consider integrating with the Trackar platform, which offers a robust tracking system with a one-time payment, ensuring even more effective location management.

SMS Commands

1. Carrier APN Configuration

It is essential to correctly configure the carrier's APN, as well as the username and password, since this information may vary depending on the chip supplier and the carrier used. For each server, use the last 7 digits of the device ID, replacing 'XXXXXXX'.

0000,XXXXXXX,2,1,claro.com.br,claro,claro,central.trackar.com.br,5087,central.trackar.com.br,5087

0000,XXXXXXX,2,1,linksolutions.br,link,link,central.trackar.com.br,5087,central.trackar.com.br,5087

0000,XXXXXXX,2,1,smart.m2m.vivo.com.br,vivo,vivo,central.trackar.com.br,5087,central.trackar.com.br,5087

0000,XXXXXXX,2,1,transmeet.br,transmeet,transmeet,central.trackar.com.br,5087,central.trackar.com.br,5087

0000,XXXXXXX,2,1,voxter.br,algar,algar,central.trackar.com.br,5087,central.trackar.com.br,5087

0000,XXXXXXX,2,1,voxter.br,nlt,nlt,central.trackar.com.br,5087,central.trackar.com.br,5087

2. Transmission Interval Configuration

Set the transmission interval to 60 seconds with the ignition on and 55 minutes (3300 seconds) with the ignition off. The time can be adjusted as needed.

0000,XXXXXXX,4,60,3300,10,1,5,10

3. Position Request via GPRS

To request the position of the device via GPRS, use the corresponding command.

0000,XXXXXXX,7

Complete the recommended settings after this step.

Special commands

4. Special Commands

Here are the commands to lock and unlock the device.

0000,XXXXXXX,5,1,0,0

0000,XXXXXXX,5,0,0,0

Alternatively, you can use hexadecimal codes to lock and unlock.