SMS Commands for MT Topten MT05S Tracker

Introduction to SMS Commands for the MT Topten MT05S Tracker

The MT Topten MT05S tracker is a powerful tool for real-time monitoring and location tracking, allowing users to interact through SMS commands. This functionality is particularly useful in situations where internet access may be limited or where quick and direct communication is necessary. To use the SMS commands, it is essential that the device is properly installed and configured, and that it has an active SIM card with sufficient credits for sending and receiving messages.

Security is a crucial aspect when using SMS commands. It is highly recommended that you protect your access passwords and command codes, avoiding sharing them with third parties. Always keep your information secure to ensure that only you have control over the tracker.

Additionally, familiarize yourself with the available commands and their respective functions to optimize your experience with the MT Topten MT05S. With the right knowledge, you can make the most of your device, ensuring effective management of the security and location of objects or vehicles.

For a complete and optimized experience, consider the Trackar platform, which offers a one-time payment system for the efficient management of your tracker.

SMS Commands

1. DNS and Port Configuration

To ensure the proper functioning of the tracker, it is essential to configure the DNS correctly. Use the provided domain for the servers, which are as follows: central.trackar.com.br:6216 for all three servers.

SET URL=central.trackar.com.br:6216

2. Operator APN Configuration

The APN configuration is crucial, as it varies according to the operator and the chip used. It is important to enter the correct APN, username, and password data to ensure the device's connectivity.

SET APN=ALLCOM.BR:ALLCOM:ALLCOM

SET APN=JBGPRS.ALGAR.BR:ALGAR:ALGAR

SET APN=META.COM.BR:VIVO:VIVO

SET APN=SMART.M2M.VIVO.COM.BR:VIVO:VIVO

SET APN=TRANSMEET.BR:TRANSMEET:TRANSMEET

3. Communication Interval with Ignition On

The communication time with the ignition on can be adjusted in seconds, allowing you to set the frequency of data transmission. The default value is 60 seconds.

SET T3 FREQ=060

4. Communication Interval with Ignition Off

Just like the communication interval with the ignition on, this parameter can be adjusted, but in minutes. The default is 55 minutes, which defines the transmission frequency when the vehicle is off.

SET HEARTBEAT=55

These settings are recommended for better performance of the tracker.

Special commands

5. Special Commands

These commands are used for various special functions of the device, such as ignition configuration, locking, and rebooting.

GET NTW

GET INFO

GET PROG

GET LOCATION

SET SLEEP_MODE=1

WAKE_UP

SET IGNITION_DETECTION=0

SET ENGINEV=13200

GET IGNITION_DETECTION

SET RELAY=1

SET RELAY=0

REBOOT