SMS Commands for MT MT88 Tracker

Introduction to SMS Commands for the MT MT88 Tracker

The SMS commands for the MT MT88 tracker are essential tools for effectively managing and monitoring your tracking device. These commands allow you to interact directly with the tracker, enabling functions such as location tracking, configuration, and security adjustments. It is crucial to understand when and how to use these commands to ensure proper and secure operation of your tracker.

Before you begin, it is important to ensure that you have the necessary prerequisites, such as the phone number associated with the device and the access password, which secures your operations. Protecting your password is crucial, as any unauthorized access can compromise the integrity of the tracker's data. Therefore, keep your password in a safe place and never share it with third parties.

With the MT MT88, you have a range of functionalities that can be activated via SMS, facilitating the monitoring and control of your vehicle or object of interest. For even more efficient management, consider using the Trackar platform, which offers a one-time payment solution to enhance your tracking experience. Make the most of your device's features!

SMS Commands

1. DNS and Port Configuration

To ensure proper communication of your tracker, it is essential to correctly configure the DNS and the port. We recommend using the domain's DNS, as per the servers listed below.

SET URL=central.trackar.com.br:6216

2. Carrier APN Configuration

The APN configuration is fundamental and must be carried out with the correct information, which varies according to the chip and the carrier. The following definitions are examples that can be used.

SET APN=ALLCOM.BR:ALLCOM:ALLCOM

SET APN=JBGPRS.ALGAR.BR:ALGAR:ALGAR

SET APN=META.COM.BR:VIVO:VIVO

SET APN=SMART.M2M.VIVO.COM.BR:VIVO:VIVO

SET APN=TRANSMEET.BR:TRANSMEET:TRANSMEET

Make sure to replace the APN, username, and password information as needed.

3. Communication Time with Ignition On

The communication time while the ignition is on can be adjusted in seconds, allowing you to set the transmission frequency according to your needs. The default interval is 60 seconds.

SET T3 FREQ=060

4. Communication Time with Ignition Off

Just like with the ignition on, the communication time with the ignition off is adjustable, but in minutes. The default is 55 minutes, allowing for an adequate transmission interval even when the vehicle is not in operation.

SET HEARTBEAT=55

These settings are recommended to optimize the performance of the tracker.

Special commands

5. Special Commands

In addition to the basic settings, there are special commands that can be used to manage the device more effectively.

GET NTW

GET INFO

GET PROG

GET LOCATION

SET SLEEP_MODE=1

WAKE_UP

SET IGNITION_DETECTION=0

SET ENGINEV=13200

GET IGNITION_DETECTION

SET RELAY=1

SET RELAY=0

REBOOT

These commands provide additional functionalities for managing the tracker.