SMS Commands for MT MT02 Tracker

Introduction to SMS Commands for MT MT02 Trackers

The MT MT02 trackers are powerful tools for real-time monitoring and location tracking. SMS commands are a practical way to interact with the device, allowing you to perform various functions directly from your mobile phone. It is essential to understand when to use these commands, as well as the prerequisites to ensure effective communication with the tracker.

Before starting to use the SMS commands, make sure that the SIM card installed in the device is active and has sufficient credits. Additionally, the security of the password used in the commands is vital; it is recommended to change it periodically and choose a strong combination to prevent unauthorized access.

SMS commands can be used in various situations, such as activating tracking mode, setting up movement alerts, or even receiving information about the current location of your vehicle or tracked object.

Make the most of your MT MT02 tracker and explore the Trackar platform, which offers a one-time payment and a range of features to optimize your tracking. Stay informed and protected!

SMS Commands

1. DNS and Port Configuration

To ensure your device's connectivity, it is essential to correctly configure the DNS and server port. Use the following address as a reference for the server configuration: central.trackar.com.br:6216. This address should be replicated for the three servers, ensuring a stable connection.

SET URL=central.trackar.com.br:6216

2. Carrier APN Configuration

The correct APN configuration is crucial for the tracker to function. The APN, username, and password information must be adjusted according to the SIM card and carrier used. Below are the necessary commands for APN configuration:

SET APN=ALLCOM.BR:ALLCOM:ALLCOM

SET APN=JBGPRS.ALGAR.BR:ALGAR:ALGAR

SET APN=META.COM.BR:VIVO:VIVO

SET APN=SMART.M2M.VIVO.COM.BR:VIVO:VIVO

SET APN=TRANSMEET.BR:TRANSMEET:TRANSMEET

Make sure to enter the correct information according to your carrier.

3. Communication Time Configuration with Ignition On

Adjust the transmission interval while the ignition is on. The time is configurable in seconds. The default value is 60 seconds, which determines the device's communication frequency.

SET T3 FREQ=060

4. Communication Time Configuration with Ignition Off

Set the communication interval when the ignition is off. This time is adjustable in minutes, with 55 minutes being the default interval. This ensures that the device continues to function even when the vehicle is not in use.

SET HEARTBEAT=55

Special commands

5. Special Commands

Below are some special commands that can be used to manage the device:

GET NTW

GET INFO

GET PROG

GET LOCATION

SET SLEEP_MODE=1

WAKE_UP

SET IGNITION_DETECTION=0

SET ENGINEV=13200

GET IGNITION_DETECTION

SET RELAY=1

SET RELAY=0

REBOOT