SMS Commands for Jimi NT201 Tracker

Introduction to SMS Commands for the Jimi NT201 Tracker

The Jimi NT201 tracker is a powerful tool for monitoring vehicles and assets, offering convenient communication through SMS commands. In this guide, we will explore when and how to use these commands, as well as highlight the prerequisites and the importance of password security.

SMS commands are especially useful in situations where data connectivity may be limited or non-existent, allowing you to control and track your device efficiently. Before sending any command, it is important to ensure that you have correctly configured your tracker, including inserting the SIM card and setting a secure password. The password acts as an additional layer of security, protecting your data and preventing unauthorized access.

It is recommended that the password be complex, combining letters, numbers, and special characters, to enhance the security of your device. With these precautions in mind, you will be ready to effectively use the SMS commands of the Jimi NT201.

To further optimize your tracking experience, consider the Trackar platform, which offers a one-time payment system and comprehensive features to manage your location in real-time.

SMS Commands

1. Time Zone Configuration

Adjusting the time zone is essential to ensure that the tracker functions correctly. Use the specified command to set the desired time zone.

GMT,W,0#

2. Position Configuration by Angle

It is possible to set the position of the tracker based on a specific angle. The default value for curve points is 30°, but you can disable it by setting the value to 0.

BEND,1,30#

3. Transmission Time in Motion

The transmission time while the device is in motion can be adjusted. The default is 60 seconds, but you can modify this time as needed.

TIMER,60#

4. Transmission Time Stopped

Just like the movement time, the transmission time when the device is stopped can also be modified. The default is 55 minutes.

STATIC,55#

5. Emergency Time

Set the time in which the tracker should send the location in case of a power cut. The default is 10 seconds.

EMERG,10#

6. Accelerometer Sensitivity

The sensitivity of the accelerometer can be adjusted on a scale from 1 to 5, where 1 is the most sensitive. Adjust according to monitoring needs.

VIBRATION,3#

7. Communication Protocol

Configure the communication protocol of the tracker to ensure correct data transmission.

SETLOCX12#

8. DNS and Port Configuration

It is necessary to configure the DNS server and port so that the tracker can connect correctly to the platform.

SERVER,8520,central.trackar.com.br,5013#

9. Carrier APN Configuration

The APN configuration is crucial for the tracker to function. APN, username, and password information must be updated according to the carrier used.

APN,ALLCOM.ALGAR.BR,ALLCOM,ALLCOM#

APN,ALLCOM.BR,ALLCOM,ALLCOM#

APN,ALLCOM.VIVO.COM.BR,ALLCOM,ALLCOM#

APN,CLARO.COM.BR,CLARO,CLARO#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR,ARQIA,ARQIA#

APN,JBGPRS.BR,ARQIA,ARQIA#

APN,KORE.BR,KORE,KORE#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR,ALGAR,ALGAR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR,VODAFONE,VODAFONE#

APN,OKTOR.BR,OKTOR,OKTOR#

APN,POWERTECH,ALGAR,1212#

APN,SMART.M2M.VIVO.COM.BR,VIVO,VIVO#

APN,SS.ALGAR.BR,ALGAR,ALGAR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR,TRANSMEET,TRANSMEET#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR,VIVO,VIVO#

APN.BRT.BR#

APN.META.VIVO.COM.BR,META,META#

APN.NLT.COM.BR,NLT,NLT#

10. Force Position Communication

If necessary, you can force the tracker to send its position immediately. Use the appropriate command for this.

123

It is recommended to perform these configurations to ensure optimal device operation.

Special commands

1. Special Commands

Special commands allow for more advanced management of the device. Use them with caution.

DYD,000000#

HFYD,000000#

RESET#

CLRG#

PARAM#

STATUS#

ACCVIRTON#

ACCVIRTOFF#

YSJ010#

GPS#

HBT,1#

URL#

WAKE,1#

SLEEP,5#

SLPON#

SLPOFF#

POWER1#

POWER0#

RELAY,1#

RELAY,0#

FACTORY#

Make sure your device is updated to use some of these features.