SMS commands for the Jimi JM08 tracker

Introduction to SMS Commands for the Jimi JM08 Tracker

The Jimi JM08 tracker is a powerful tool for monitoring and managing the location of vehicles and assets, using SMS commands to facilitate its operation. These commands are essential for customizing and optimizing the device's performance, allowing users to perform specific actions such as real-time tracking, setting geographic boundaries, and much more. To use the SMS commands effectively, it is important to know the prerequisites, such as ensuring that the device is properly configured and that the SIM card is active.

Additionally, the security of the password used in the SMS commands is a critical aspect. It is essential to choose a strong password and keep it confidential to prevent unauthorized access to the tracker's information. The combination of robust security and proper use of the commands will ensure efficient and secure monitoring.

To maximize your experience with the Jimi JM08, consider integrating its operation with the Trackar platform, which offers a one-time payment and additional features for even more efficient management of your tracker.

SMS Commands

1. Time Zone Configuration

It is essential that the device's time zone is set correctly to ensure accuracy in location reports. Use the appropriate command to adjust the time zone as needed.

GMT,W,0,0#

2. Update Time Adjustment

The update time determines how frequently the device sends location data. You can customize this interval, which should be between 5 and 18000 seconds, with default values of 10 seconds for both ignition on and off.

TIMER,60,3300#

3. External Voltage Activation

Activate the external voltage to monitor the amount of analog upload. The value should be adjusted between 5 and 3600, depending on your needs.

ADT,ON,3600#

4. DNS and Port Configuration

It is necessary to configure the server for the tracker. The command should be adjusted with the server address and the correct port to ensure effective communication.

SERVER,1,central.trackar.com.br,5023,0#

5. Carrier APN Configuration

The APN configuration is crucial as it varies according to the carrier and the chip used. Make sure to enter the correct information to ensure connectivity.

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,BRT.BR#

APN,CLARO.COM.BR#

APN,CONEXAO.GETRAK.COM.BR#

APN,ESEYE.COM#

APN,FEDERAL.BR#

APN,GPRS.OI.COM.BR#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,HINOVA.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,META.VIVO.COM.BR#

APN,OKTOR.BR#

APN,POWERTECH.ALGAR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,SS.CLARO.COM.BR#

APN,TIM.BR#

APN,TRANSMEET.BR#

APN,VIRTUEYES.COM.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,WAP.CTBC.BR#

APN,WL.VIVO.COM.BR#

APN,ZAP.VIVO.COM.BR#

6. GPRS Activation

To allow the device to connect to the mobile data network, it is necessary to activate GPRS using the corresponding command.

GPRSON,1#

7. Satellite Receiver Activation

Activate the satellite receiver for a period of 5 minutes to ensure that the device can accurately locate its position.

GPSON#

Special commands

Special Commands

Special commands allow additional queries and adjustments on the device. Use them as needed to manage and monitor the tracker.

PARAM#

SCXSZ#

GPRSSET#

STATUS#

ADT,OFF#

GPRSON,0#

GPRSON#

GPSDUP,A#

GPSDUP#

EXBATALM,ON#

EXBATALM,OFF#

RELAY,1#

RELAY,0#

ASETAPN,ON#

ASETAPN,OFF#

ANGLEREP,ON,20,2#

DISTANCE,300#

ICCID#

IMSI#

DOOR,0#

DOOR,1#

CLEAR#

WHERE#

URL#

POSITION#

VERSION#

RESET#

FACTORYALL#