SMS commands for Jimi JM01 tracker

Introduction to SMS Commands for the Jimi JM01 Tracker

SMS commands are an essential tool for managing and monitoring the Jimi JM01 tracker. They allow you to access and control various functionalities of the device quickly and practically, using only text messages. It is important to know when to use these commands: in situations where internet access is limited or when seeking a quick solution to obtain information about the location and status of your vehicle or tracked object.

Before you begin, make sure you have the necessary prerequisites: the tracker must be properly installed and configured, and you must have access to the security password. The security of the password is crucial, as it ensures that only authorized users can send commands to the device. Keep your password in a safe place and avoid sharing it with untrustworthy individuals.

With the Jimi JM01, you have a range of functions available that can be activated via SMS, making tracking even more efficient. To explore all possibilities and optimize the use of your tracker, consider integrating the Trackar platform, which offers a one-time payment for comprehensive and detailed management of your device.

SMS Commands

1. Time Zone Configuration

It is essential to adjust the device's time zone so that location information is accurate. Use the appropriate command to set the GMT.

GMT,W,0,0#

2. Update Time Configuration

The tracker’s update time can be adjusted between 5 and 18000 seconds. The interval X is the transmission time while the vehicle is moving, and Y is the time when the vehicle is stationary.

TIMER,60,3300#

3. Activate Voltage (External Voltage)

The external voltage setting should be adjusted as needed, with values ranging from 5 to 3600. This allows monitoring of the vehicle's voltage.

ADT,ON,3600#

4. Server Configuration

The servers must be configured correctly to ensure the device communicates with the tracking platform. Use the command to set the desired servers.

SERVER,1,central.trackar.com.br,5023,0#

5. Operator APN Configuration

The correct APN configuration is crucial for device connectivity. Check the operator's information and adjust as necessary.

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,BRT.BR#

APN,CLARO.COM.BR#

APN,CONEXAO.GETRAK.COM.BR#

APN,ESEYE.COM#

APN,FEDERAL.BR#

APN,GPRS.OI.COM.BR#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,HINOVA.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,META.VIVO.COM.BR#

APN,OKTOR.BR#

APN,POWERTECH.ALGAR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,SS.CLARO.COM.BR#

APN,TIM.BR#

APN,TRANSMEET.BR#

APN,VIRTUEYES.COM.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,WAP.CTBC.BR#

APN,WL.VIVO.COM.BR#

APN,ZAP.VIVO.COM.BR#

6. Activate GPRS

To connect the device to the network, it is necessary to activate GPRS. Use the corresponding command for this configuration.

GPRSON,1#

7. Activate Satellite Receiver

The satellite receiver can be activated for a period of 5 minutes to locate the device. Use the command to perform this activation.

GPSON#

Special commands

Special Commands

These additional commands allow for more advanced management of the device.

PARAM#

SCXSZ#

GPRSSET#

STATUS#

ADT,OFF#

GPRSON,0#

GPRSON#

GPSDUP,A#

GPSDUP#

EXBATALM,ON#

EXBATALM,OFF#

RELAY,1#

RELAY,0#

ASETAPN,ON#

ASETAPN,OFF#

ANGLEREP,ON,20,2#

DISTANCE,300#

ICCID#

IMSI#

DOOR,0#

DOOR,1#

CLEAR#

WHERE#

URL#

POSITION#

VERSION#

RESET#

FACTORYALL#