SMS Commands for Jimi JM-VL01 Tracker

Introduction to SMS Commands for the Jimi JM-VL01 Tracker

The Jimi JM-VL01 tracker is a powerful tool for vehicle monitoring, allowing users to perform various operations through SMS commands. These commands are especially useful in situations where internet access may be limited or when a quick response is needed. To effectively use the SMS commands, it is essential to be aware of some prerequisites, such as ensuring that the device is correctly installed and that the SIM card is active and has available balance.

Security is a crucial aspect when using SMS commands. To protect your tracker, it is recommended to change the default password to a unique and complex combination, thus avoiding unauthorized access. Additionally, it is important to keep the device in a secure location and regularly monitor its operation to ensure that all functions are working properly.

By mastering the use of SMS commands, you will be able to manage your Jimi JM-VL01 efficiently and practically, increasing the effectiveness of tracking your vehicle. For a complete and simplified solution, consider the Trackar platform, which offers a one-time payment system to facilitate the management of your tracker.

SMS Commands

1. Time Zone Configuration

To ensure the tracker functions correctly, it is essential to set the time zone. Use the appropriate command to adjust the time according to your location.

GMT,W,0,0#

2. Update Interval Adjustment

The tracker’s update time can be adjusted between 5 and 18000 seconds. The factory default is 10 seconds for both ignition on and off. Adjust as needed to optimize tracking.

TIMER,60,3300#

3. External Voltage Activation

Activate the external voltage for continuous monitoring. The analog upload should be set between 5 and 3600 seconds, depending on the monitoring needs.

ADT,ON,3600#

4. Server Configuration

It is necessary to configure the server address and port to ensure that the tracker sends data correctly. Use the commands to set the desired server.

SERVER,1,central.trackar.com.br,5023,0#

5. APN Configuration

APN configuration is crucial for device connectivity. Ensure to enter the correct carrier information, as it varies by SIM card provider. Use the listed commands for each carrier.

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,BRT.BR#

APN,CLARO.COM.BR#

APN,CONEXAO.GETRAK.COM.BR#

APN,ESEYE.COM#

APN,FEDERAL.BR#

APN,GPRS.OI.COM.BR#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,HINOVA.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,META.VIVO.COM.BR#

APN,OKTOR.BR#

APN,POWERTECH.ALGAR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,SS.CLARO.COM.BR#

APN,TIM.BR#

APN,TRANSMEET.BR#

APN,VIRTUEYES.COM.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,WAP.CTBC.BR#

APN,WL.VIVO.COM.BR#

APN,ZAP.VIVO.COM.BR#

6. GPRS Activation

Activate GPRS to allow data communication from the tracker. This step is crucial to ensure that the device sends location information.

GPRSON,1#

7. Satellite Receiver Activation

To ensure the tracker can capture the location, activate the satellite receiver for a period of 5 minutes. This is essential for the initial operation of the device.

GPSON#

Special commands

Special Commands

Below are additional commands that can be used to manage and query device settings.

PARAM#

SCXSZ#

GPRSSET#

STATUS#

ADT,OFF#

GPRSON,0#

GPRSON#

GPSDUP,A#

GPSDUP#

EXBATALM,ON#

EXBATALM,OFF#

RELAY,1#

RELAY,0#

ASETAPN,ON#

ASETAPN,OFF#

ANGLEREP,ON,20,2#

DISTANCE,300#

ICCID#

IMSI#

DOOR,0#

DOOR,1#

CLEAR#

WHERE#

URL#

POSITION#

VERSION#

RESET#

FACTORYALL#