SMS Commands for J14 J14 Tracker

Introduction to SMS Commands for the J14 Tracker

The J14 trackers offer a range of features that can be accessed through SMS commands, providing a convenient way to monitor and manage the device. Using these commands is ideal in situations where you need to obtain real-time information, such as the vehicle's location, or to make adjustments to the tracker's settings. To use the SMS commands, it is essential that the device is correctly configured and that you have the access password, which should be kept secure to prevent unauthorized access.

Before sending any command, ensure that the SIM card is active and that the tracker is functioning properly. The security of your password is paramount; never share this information with third parties and change it periodically to ensure the protection of your data. Use the SMS commands consciously and always pay attention to the manufacturer's recommendations to maximize the efficiency of your J14 tracker.

For a complete experience, consider the Trackar platform, which offers a one-time payment and an intuitive interface to manage your tracking information efficiently.

SMS Commands

1. Time Zone Configuration

The first essential step is the configuration of the time zone. For this, use the appropriate command to adjust the GMT as needed.

GMT,W,0,0#

2. Update Time Configuration

The update time can be adjusted in seconds, ranging from 5 to 18000. By default, T1 and T2 are set to 10 seconds. The transmission interval when the ignition is on or in motion is 60 seconds, and when off or stopped is 3300 seconds.

TIMER,60,3300#

3. DNS or IP and Port Configuration

It is recommended to use a domain DNS for server configurations. The default server should be configured as central.trackar.com.br on port 5023.

SERVER,1,central.trackar.com.br,5023,0#

4. Carrier APN Configuration

It is crucial to correctly enter the APN, username, and password information, as they vary according to the chip provider and the carrier used. Use one of the APN commands below according to your carrier.

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,BRT.BR#

APN,CLARO.COM.BR#

APN,CONEXAO.GETRAK.COM.BR#

APN,ESEYE.COM#

APN,FEDERAL.BR#

APN,GPRS.OI.COM.BR#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,HINOVA.BR#

APN,IOT4U.BR#

APN,JBGPRS.ALGAR.BR#

APN,LF.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,META.BR#

APN,META.VIVO.COM.BR#

APN,NLT.COM.BR#

APN,OKTOR.BR#

APN,POWERTECH.ALGAR#

APN,SIMPLEPM.ALGAR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR#

APN,TRANSMEET.BR#

APN,VIRTUEYES.COM.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,WAP.CTBC.BR#

APN,WL.VIVO.COM.BR#

APN,ZAP.VIVO.COM.BR#

5. Immediate Lock Activation

To ensure the device's security, it is recommended to activate the immediate lock function. Use the specified command to enable this functionality.

SZCS#SOURCE_OFF_TYPE=1

This configuration is essential for the protection of your device.

Special commands

Special Commands

Below are the special commands that can be used for various functions of the tracker.

PARAM#

SCXSZ#

GPRSSET#

STATUS#

GPRSON,1#

GPRSON,0#

RELAY,1#

RELAY,0#

SZCS#SOURCE_OFF_TYPE=1

SZCS#SOURCE_OFF_TYPE=0

SZCS#SLPDISCONNECT=0

CXCS#SLPDISCONNECT

SZCS#GPS_DISSLP=0

CLEAR#

WHERE#

URL#

POSITION#

VERSION#

RESET#

FACTORY#