SMS Commands for GPS G900 Tracker
Introduction to using SMS commands on the GPS G900
Using SMS commands on the GPS G900 tracker is one of the most practical and efficient ways to manage its functions and monitor the vehicle in real-time. These commands allow you to activate or deactivate features, check the current location, and receive alerts directly on your mobile phone. However, it is essential to know when and how to use these commands to ensure the effectiveness and security of your device.
Before you begin, make sure your GPS G900 is properly configured and that you have access to the phone line associated with the device. Additionally, it is crucial to maintain the security of your password, as it is the key to protecting your information and preventing unauthorized access. A strong and well-maintained password is essential to ensure that only you can control the tracker.
Proper use of SMS commands not only optimizes the functionality of your GPS G900 but also provides an extra layer of convenience and security. Explore the possibilities that this technology offers and make the most of your device. For even more efficient management, consider the Trackar platform, which offers a one-time payment system for monitoring and controlling your tracker.
SMS Commands
1. Start of Equipment Configuration
To begin the configuration of your GPS device G900, it is necessary to use the specific command. This step is crucial to ensure that the equipment is ready for use.
begin123456
2. Time Zone Configuration
Adjusting the time zone is essential for the tracker to function correctly. Use the appropriate command to set the time zone according to your location.
timezone123456 0
3. Carrier APN Configuration
Configuring the APN is essential for the tracker to connect to the data network. It is important to enter the correct APN, username, and password information, as they vary by carrier. Below are the commands for different APNs.
apn,m2track.br,vivo,vivo#
apn123456 allcom.br
apn123456 allcom.vivo.com.br
apn123456 brt.br
apn123456 claro.com.br
apn123456 datatem.algar.br
apn123456 eseye.com
apn123456 gprs.amazoniacelular.com.br
apn123456 gprs.oi.com.br
apn123456 gprs.telemigcelular.com.br
apn123456 linksolutions.br
apn123456 m2data.algar.br
apn123456 m2data.arqia.br
apn123456 m2data.vivo.com.br
apn123456 m2m.vodafone.br
apn123456 m2mprepgago.br arqia arqia
apn123456 meta.vivo.com.br meta meta
apn123456 oktor.br
apn123456 sercomtel.com.br
apn123456 smart.m2m.vivo.com.br
apn123456 ss.algar.br
apn123456 tim.br
apn123456 tmdata.tim.br
apn123456 transmeet.br
apn123456 virtueyes.vivo.com.br
apn123456 voxter.algar.br
apn123456 voxter.br
apn123456 wap.ctbc.com.br
apn123456 wl.vivo.com.br
apn123456 y1.m2m.algar.com.br
apn123456 zap.vivo.com.br
Make sure that the APN information is correct for the carrier used.
4. IP and Port Configuration
To ensure proper communication of the tracker, it is necessary to configure the IP and port of the server. Enter the desired server information.
Fill in the fields with the information for server 01, 02, and 03.
5. Enable GPRS Transmission
Activate data transmission via GPRS using the appropriate command. This is essential for the tracker to send real-time information.
gprs123456 1
6. Tracking Mode Configuration
Set the time interval for tracking, which can be adjusted according to your needs. The default value for transmission is 60 seconds.
itv123456 60
The transmission time can be adjusted as needed.
Special commands
Special Commands
Below are some special commands that can be used to check configurations and control the device.
check123456
getimei123456
speed123456 80
speed123456 0
DY123456 1
TY123456 1
Use these commands to monitor and control the device as needed.
Own your tracking platform with a one-time payment