SMS Commands for the Concox SL48 Tracker

Introduction to SMS Commands for the Concox SL48 Tracker

The Concox SL48 tracker is a powerful tool for real-time monitoring and location tracking. SMS commands are one of the features that allow users to interact with the device in a practical and efficient manner. It is important to understand when and how to use these commands to ensure optimal performance of your tracker.

Before you begin, make sure that the device is properly configured and that you have the correct password to send the commands. Password security is crucial; use a strong combination and avoid sharing it with unauthorized individuals. This ensures that only you have control over the functions of the tracker.

SMS commands can be used in various situations, such as when you need to change settings, obtain the current location, or activate specific functions of the device. Whenever you need a quick update, this option is a viable solution, especially in areas where data connectivity may be limited.

To optimize your experience, consider integrating the Concox SL48 tracker with the Trackar platform, which offers a one-time payment model and a user-friendly interface for management and monitoring. Enhance your operations with this practical and efficient solution!

SMS Commands

1. Time Zone Configuration

It is essential to adjust the GPS tracker’s time zone to ensure that location information is accurate. Use the appropriate command to set the GMT and the hour difference.

GMT,W,0,0#

2. Update Interval Configuration

Transmission intervals can be adjusted according to need. You can set different times for when the vehicle is in motion and when it is stationary.

TIMER,20,20#

X represents the interval in motion, while Y is for the interval when stationary.

3. Angle-Based Update

Location updates can be configured to occur based on a specific angle. This allows the tracker to be more efficient in certain situations.

ANGLEREP,ON,30,2#

The angle is defined in degrees and the detection time in seconds.

4. Heartbeat Configuration

The heartbeat interval can be adjusted to optimize battery usage. This sets the frequency with which the tracker sends information when the ignition is on or off.

HB,1,55#

5. Server and Port Configuration

Configure the server and port to ensure that the tracker connects correctly to the network. It is important to verify that the information is correct.

SERVER,1,central.trackar.com.br,5023,0#

SERVER,1,central.trackar.com.br,5023,0#

SERVER,1,central.trackar.com.br,5023,0#

6. APN Configuration

APN configuration is crucial for the tracker’s operation. The information must be adapted according to the carrier used. Check each of the listed commands.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

APN, username, and password information must be updated according to the carrier.

7. Force Position Sending

If necessary, you can force the tracker to send its position for a specific period. This can be useful in emergency situations or intensive monitoring.

LJDW#

The tracker will send positions for 5 minutes.

Special commands

Special Commands

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

These commands allow various additional functionalities and configurations of the tracker.