SMS Commands for Concox SL22 Tracker

Introduction to SMS Commands for the Concox SL22 Tracker

The Concox SL22 tracker is an advanced solution for vehicle monitoring and location, offering a variety of functionalities that can be accessed through SMS commands. SMS commands are useful in various situations, such as when you need to change device settings, request location information, or activate specific functions remotely. To use these commands, it is essential to ensure that you have an active SIM card in the device and that it is properly configured.

Additionally, security is a crucial aspect when using SMS commands. The Concox SL22 allows you to set an access password, which should be kept confidential. This password protects your tracker from unauthorized access and ensures that only you can manage the device's functions. Whenever possible, use strong passwords and avoid sharing them.

With the Trackar platform, you can further enhance your experience with your Concox SL22, offering efficient and practical management, all with a one-time payment. Try it out and discover how to optimize the monitoring of your vehicle!

SMS Commands

1. Time Zone Configuration

It is essential to set the device's time zone to ensure that location information is accurate. Use the appropriate command to adjust as needed.

GMT,W,0,0#

2. Update Time Adjustment

The tracker’s update interval can be adjusted in seconds. It is necessary to set two values: one for when the vehicle is in motion and another when it is stationary.

TIMER,20,20#

3. Angle-Based Update

Configure the location update based on a specific angle and detection time. This allows for a quicker response to changes in the vehicle's direction.

ANGLEREP,ON,30,2#

4. Heartbeat Configuration

The heartbeat interval can be adjusted to monitor the vehicle's activity. It is important to set different intervals for when the ignition is on and off.

HB,1,55#

5. Server Configuration

It is necessary to configure the server that the tracker will use to send data. This is done through commands that define the server and port.

SERVER,1,central.trackar.com.br,5023,0#

6. Carrier APN Configuration

APN, username, and password information must be adjusted according to the carrier of the chip used. This is crucial to ensure device connectivity.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Force Position Sending

If necessary, you can force the device to send its positions for a period of 5 minutes. This can be useful in emergency situations or intensive monitoring.

LJDW#

Special commands

Special Commands

These additional commands allow you to query and change specific settings of the tracker.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

Remember that some commands may consume more vehicle battery.