SMS Commands for the Concox GV55 Lite Tracker

Introduction to SMS Commands for the Concox GV55 Lite Tracker

The Concox GV55 Lite tracker is a powerful tool for real-time monitoring and tracking. One of its most practical features is the ability to operate via SMS commands, allowing users to send instructions directly to the device. These messages can be used in various situations, such as changing settings, requesting the current location, or activating specific functions of the tracker.

Before using the SMS commands, it is important to ensure that you meet some prerequisites. Make sure that the device is properly installed and that the SIM card is active and has sufficient balance for sending and receiving messages. Additionally, the security of the password is a crucial aspect; it is recommended to regularly change the default password to prevent unauthorized access and ensure the integrity of your tracker.

By familiarizing yourself with the SMS commands of the Concox GV55 Lite, you maximize the potential of your tracker, making it an even more efficient tool for the protection and monitoring of assets. For a complete experience, consider using the Trackar platform, which offers a one-time payment and additional features to optimize the use of your tracker.

SMS Commands

1. Factory Reset

To restore the device to factory settings, use the appropriate command. This procedure is useful for troubleshooting or starting a new configuration.

AT+GTRTO=gv55,4,,,,,,FFFF$

2. Time Zone Configuration

Adjust the device's time zone to ensure that location data is accurate. This adjustment is essential for the proper functioning of the tracker.

AT+GTTMA=gv55,+,0,0,0,,,,,,FFFF$

3. Carrier APN Configuration

It is crucial to configure the APN, username, and password according to the carrier used. This information varies depending on the chip provider.

AT+GTBSI=gv55,agilis.algar.br,agilis,agilis,,,,,FFFF$

AT+GTBSI=gv55,allcom.br,allcom,allcom,,,,,FFFF$

AT+GTBSI=gv55,datacard.nextel3g.net.br,,,,,,,FFFF$

AT+GTBSI=gv55,jbgprs.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,linksolutions.br,link,link,,,,,FFFF$

AT+GTBSI=gv55,m2data.arqia.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,meta.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,smart.m2m.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,ss.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,ss.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,tim.br,tim,tim,,,,,FFFF$

AT+GTBSI=gv55,transmeet.br,transmeet,transmeet,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,nlt,nlt,,,,,FFFF$

4. DNS and Port Configuration

Set the DNS servers and port to ensure that the tracker connects correctly to the network. This is essential for data transmission.

AT+GTSRI=gv55,4,,2,central.trackar.com.br,5004,,,,0,0,0,1,,,FFFF$

5. Sending Interval

Adjust the communication interval and detection angle. This allows the device to send data at a specific interval, saving battery and optimizing performance.

AT+GTFRI=gv55,1,0,,0,0000,0000,,60,200,1000,,20,3300,,,,,FFFF$

6. External Battery Configuration

Configure the external battery to ensure that the device operates correctly even when the main power source is turned off. This is important for safety and continuity of tracking.

AT+GTEPS=gv55,2,1000,28000,2,3,0,0,0,0,1,30,30,,FFFF$

7. Global Settings

Adjust the general settings of the device to customize its operation. These settings can affect the performance and usability of the tracker.

AT+GTCFG=gv55,gv55,,1,0,,,3F,2,,1F2F,1,1,1,120,2,1,1,1,1F,0,FFFF$

8. Enable Tow Alarm

Activate the tow alarm function to enhance vehicle security. This setting allows the device to detect unauthorized towing attempts.

AT+GTTOW=gv55,1,5,1,60,0,0,0,0,2,3,2,,,,,,,,,FFFF$

9. Request Position

Send a command to obtain the current position of the device. This function is useful for real-time monitoring.

AT+GTRTO=gv55,1,,0,,,,FFFF$

Special commands

1. Special Commands

Use special commands for specific device functions, such as restarting, clearing memory, and activating or deactivating detections.

AT+GTRTO=gv55,3,,,,,,FFFF$

AT+GTHMC=gv55,1,00000:00:00,,,,,,,,,FFFF$

AT+GTRTO=gv55,D,,,,,,FFFF$

AT+GTRTO=gv55,0,,0,,,,FFFF$

AT+GTRTO=gv55,7,,0,,,,FFFF$

AT+GTJDC=gv55,2,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTJDC=gv55,0,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTOUT=gv55,1,0,0,0,0,0,,,,0,,,,,,,FFFF$

AT+GTOUT=gv55,0,0,0,0,0,0,,,,0,,,,,,,FFFF$