SMS Commands for Concox GV500MAP Tracker

Introduction to SMS Commands for the Concox GV500MAP Tracker

The Concox GV500MAP tracker is an advanced solution for vehicle monitoring, providing a range of functionalities through SMS commands. These commands are used to manage and configure the device in a practical and efficient manner. It is important to know when to use these commands, such as in situations of adjusting tracking settings, querying real-time location, or activating specific functions.

Before you start using the SMS commands, it is essential to ensure that you have all the prerequisites in order. This includes confirming that the device is properly installed and connected to a functional GSM network, as well as a basic understanding of the command structure. Security is also a critical factor; therefore, it is recommended to set strong passwords to prevent unauthorized access, ensuring that your tracking information and data are protected.

Mastering the SMS commands of the Concox GV500MAP not only optimizes the use of the device but also enhances its effectiveness in protecting assets. For an even more complete monitoring experience, consider exploring the Trackar platform, which offers a one-time payment service to manage your tracking needs in an integrated manner.

SMS Commands

1. Factory Reset

To perform a factory reset of the device, use the appropriate command. This process will restore all settings to factory defaults, which is essential for troubleshooting or reconfiguring the device.

AT+GTRTO=gv50,4,,,,,,FFFF$

2. Time Zone Configuration

It is important to adjust the time zone to ensure that location data is accurate. The following command should be sent to correctly configure the device's time zone.

AT+GTTMA=gv50,+,0,0,0,,,,,,FFFF$

3. Carrier APN Configuration

Configuring the APN (Access Point Name) is crucial as it varies according to the carrier. Make sure to enter the correct information to ensure the device's connectivity.

AT+GTBSI=gv50,agilis.algar.br,agilis,agilis,,,,,FFFF$

AT+GTBSI=gv50,allcom.br,allcom,allcom,,,,,FFFF$

AT+GTBSI=gv50,datacard.nextel3g.net.br,,,,,,,FFFF$

AT+GTBSI=gv50,datelo.com.br,claro,claro,,,,,FFFF$

AT+GTBSI=gv50,jbgprs.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,linksolutions.br,link,link,,,,,FFFF$

AT+GTBSI=gv50,m2data.arqia.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,m2data.vivo.com.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,smart.m2m.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv50,ss.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv50,tim.br,tim,tim,,,,,FFFF$

AT+GTBSI=gv50,transmeet.br,transmeet,transmeet,,,,,FFFF$

AT+GTBSI=gv50,upchip.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv50,voxter.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv50,voxter.algar.br,nlt,nlt,,,,,FFFF$

APN, username, and password information must be updated according to the carrier used.

4. DNS and Port Configuration

To ensure proper communication of the device, it is necessary to configure the DNS and port. Use the commands below to enter the server data.

AT+GTSRI=gv50,4,,2,central.trackar.com.br,5004,,,,0,0,0,1,,,FFFF$

5. Sending Interval Configuration

Adjusting the data sending interval is essential to optimize the device's communication. The following command allows you to configure the time and sending angle.

AT+GTFRI=gv50,1,0,,0,0000,0000,,60,200,1000,,20,3300,,,,,FFFF$

The communication interval is set to 60 seconds with the ignition on and 3300 seconds with the ignition off.

6. External Battery Configuration

To ensure the proper functioning of the external battery, use the command below. This will help optimize the device's performance.

AT+GTEPS=gv50,2,1000,28000,2,3,0,0,0,0,1,30,30,,FFFF$

7. Global Settings

The device's global settings can be adjusted to optimize its operation. Use the following command to apply the desired changes.

AT+GTCFG=gv50,gv50,,1,0,,,3F,2,,1F2F,1,1,1,120,2,1,1,1,1F,0,FFFF$

8. Enable Tow Alarm

Activating the tow alarm is essential for vehicle security. Use the command below to enable this function.

AT+GTTOW=gv50,1,5,1,60,0,0,0,0,2,3,2,,,,,,,,,FFFF$

9. Request Position

To obtain the current location of the device, use the position request command. This command allows you to know where the device is located.

AT+GTRTO=gv50,1,,0,,,,FFFF$

This command is useful for real-time monitoring.

Special commands

1. Special Commands

There are special commands that can be used for specific functions of the device. Below are some of these commands.

AT+GTRTO=gv50,3,,,,,,FFFF$

AT+GTHMC=gv50,1,00000:00:00,,,,,,,,,FFFF$

AT+GTRTO=gv50,D,,,,,,FFFF$

AT+GTRTO=gv50,0,,0,,,,FFFF$

AT+GTRTO=gv50,7,,0,,,,FFFF$

AT+GTJDC=gv50,2,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTJDC=gv50,0,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTOUT=gv50,1,0,0,0,0,0,,,,0,,,,,,,FFFF$

AT+GTOUT=gv50,0,0,0,0,0,0,,,,0,,,,,,,FFFF$