SMS Commands for Concox GV300W Tracker

Introduction to SMS Commands for Concox GV300W Trackers

The Concox GV300W trackers are versatile devices that allow real-time monitoring of vehicles and objects. To optimize the use of this equipment, it is vital to understand the SMS commands, which are a practical way to interact with the device. These commands can be used for various functions, such as checking location, setting geofencing areas, and even adjusting tracker settings.

Before using the SMS commands, it is essential to ensure that the device is properly configured and that you have access to the security password. Password protection is a crucial layer for the security of your tracker, preventing unauthorized access and ensuring that your information remains secure. It is recommended to change the default password as soon as the device is operational to avoid potential vulnerabilities.

Using SMS commands can be a quick and efficient solution, especially in situations where access to the online platform is not feasible. Familiarize yourself with the prerequisites and structure of the commands to ensure that you are maximizing the potential of your Concox GV300W.

Make the most of your Concox GV300W tracker with the Trackar platform, which offers a one-time payment for full access to features.

SMS Commands

1. Perform Factory Reset

To restore the factory settings of the GV300W tracker, you must use the specific command that resets the device. This can be useful in case of configuration issues or to restart the device setup.

AT+GTRTO=gv300,4,,,,,,FFFF$

2. Set Time Zone

Adjusting the device's time zone is essential to ensure accurate location data. Use the command below to set the desired time zone.

AT+GTTMA=gv300,+,0,0,0,,,,,,FFFF$

3. Set Carrier APN

APN (Access Point Name) settings are crucial for the device's connectivity. Make sure to enter the correct information according to the carrier of the used SIM card. Below are the commands for different carriers.

AT+GTBSI=gv300,agilis.algar.br,agilis,agilis,,,,,FFFF$

AT+GTBSI=gv300,allcom.br,allcom,allcom,,,,,FFFF$

AT+GTBSI=gv300,datacard.nextel3g.net.br,,,,,,,FFFF$

AT+GTBSI=gv300,jbgprs.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv300,linksolutions.br,link,link,,,,,FFFF$

AT+GTBSI=gv300,m2data.arqia.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv300,m2data.vivo.com.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv300,smart.m2m.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv300,ss.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv300,tim.br,tim,tim,,,,,FFFF$

AT+GTBSI=gv300,transmeet.br,transmeet,transmeet,,,,,FFFF$

AT+GTBSI=gv300,voxter.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv300,voxter.algar.br,nlt,nlt,,,,,FFFF$

Make sure to modify the APN, username, and password information as needed.

4. Set DNS and Port

It is important to correctly set the DNS servers and ports to ensure device communication. Use the commands below to configure the desired servers.

AT+GTSRI=gv300,4,,2,central.trackar.com.br,5004,,,,0,0,0,1,,,FFFF$

5. Set Sending Interval

The data sending interval can be adjusted as needed. The command allows you to configure the communication time and the device's movement angle.

AT+GTFRI=gv300,1,0,,0,0000,0000,,60,200,1000,,20,3300,,,,,FFFF$

6. Set External Battery

If the device uses an external battery, it is essential to configure it properly. The command below allows you to set the battery specifications.

AT+GTEPS=gv300,2,1000,28000,2,3,0,0,0,0,1,30,30,,FFFF$

7. Global Settings

The global settings of the device can be adjusted to meet your needs. Use the command below to set these configurations.

AT+GTCFG=gv300,gv300,,1,0,,,3F,2,,1F2F,1,1,1,120,2,1,1,1,1F,0,FFFF$

8. Enable Tow Alarm

To increase the security of your vehicle, you can enable the tow alarm using the appropriate command. This will help detect unauthorized towing attempts.

AT+GTTOW=gv300,1,5,1,60,0,0,0,0,2,3,2,,,,,,,,,FFFF$

9. Request Position

If you need to know the current location of the device, you can request the position using the specific command. This is useful for real-time monitoring.

AT+GTRTO=gv300,1,,0,,,,FFFF$

Special commands

10. Special Commands

In addition to the standard settings, there are special commands that can be used for additional functions of the device. Check the commands listed below.

AT+GTRTO=gv300,3,,,,,,FFFF$

AT+GTHMC=gv300,1,00000:00:00,,,,,,,,,FFFF$

AT+GTRTO=gv300,D,,,,,,FFFF$

AT+GTRTO=gv300,0,,0,,,,FFFF$

AT+GTRTO=gv300,7,,0,,,,FFFF$

AT+GTJDC=gv300,2,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTJDC=gv300,0,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTOUT=gv300,1,0,0,0,0,0,,,,0,,,,,,,FFFF$

AT+GTOUT=gv300,0,0,0,0,0,0,,,,0,,,,,,,FFFF$