SMS Commands for Concox GT02A Tracker

Introduction to SMS Commands for the Concox GT02A Tracker

The Concox GT02A tracker is a powerful tool for real-time monitoring and location. By using SMS commands, users can interact simply and efficiently with the device, facilitating the management of its functions. It is important to understand when and how to use these commands to ensure an optimized experience. SMS commands are ideal for situations where internet access is limited or when quick communication with the device is sought.

Before starting, it is essential to have the device's default password on hand, which should be changed to ensure the security of the information. Using strong passwords and periodic updates are recommended practices to prevent unauthorized access. Additionally, check that the SIM card is active and has sufficient balance for sending and receiving messages.

Mastering the SMS commands of the Concox GT02A not only maximizes the functionality of the tracker but also provides greater control over its operations. For even more efficient management, consider using the Trackar platform, which offers a complete service with a one-time payment and no monthly fees. Make the most of your tracker and stay in control.

SMS Commands

1. Time Zone Configuration

The first step is to adjust the device's time zone. It is essential that this setting is correct to ensure that location data is accurate.

GMT,666666,W,0#

2. Carrier APN Configuration

At this stage, it is essential to configure the APN according to the chip provider used. The APN, username, and password information must be entered correctly, as they vary by provider. Check every detail to ensure connectivity.

APN,666666,internet,tmn,tmnnet#

APN,666666,smart.m2m.vivo.com.br,vivo,vivo#

APN,666666,transmeet.br,transmeet,transmeet#

APN,666666,upchip.br,vivo,vivo#

APN,666666,voxter.br,algar,algar#

APN,666666,zap.vivo.com.br,vivo,vivo#

Make sure the data is correct to avoid connection issues.

3. DNS and Port Configuration

Configure the DNS servers to ensure that the tracker operates properly. It is possible to set multiple servers to increase connection reliability.

SERVER,666666,1,central.trackar.com.br,6002,0#

4. GPRS Mode Activation

Activate GPRS mode so that the device can connect to the mobile data network. This is crucial for the tracker's operation.

GPRSON,666666,1#

5. Update Interval

Set the tracker’s update interval, which can be adjusted between 10 to 1800 seconds. A shorter interval provides more frequent updates but may consume more battery.

TIMER,666666,,60#

The minimum value is 10 seconds and the maximum is 1800 seconds.

Special commands

Special Commands

These commands allow you to perform specific operations with the tracker. Use them as needed.

Status,666666#

URL,666666#

WHERE,666666#

Param,666666#

FACTORY,666666#