SMS Commands for Concox G18 Tracker

Introduction to SMS Commands for the Concox G18 Tracker

The Concox G18 tracker is a powerful tool for monitoring and securing vehicles and other assets. One of its most useful features is the ability to send commands via SMS, allowing the user to perform various actions quickly and conveniently. However, it is essential to know when and how to use these commands to ensure effective tracking.

Before getting started, it is important to meet some prerequisites, such as having an active SIM card in the device and ensuring that the default access password has been changed to a personal and secure password. Password security is a priority, as it protects your tracker from unauthorized access. It is recommended to periodically change the password and choose combinations that are not easily guessable.

SMS commands can be used in various situations, from immediate vehicle location to configuring specific functions. Proper use of these commands can optimize your experience with the Concox G18, providing greater control and security.

For even more efficient management of your tracker, consider exploring the Trackar platform, which offers a one-time payment solution for complete and real-time monitoring.

SMS Commands

1. Time Zone Configuration

To ensure that the tracker functions correctly, it is essential to set the time zone. This will allow the device to record the correct time when the information is collected.

GMT,W,0,0#

2. Update Interval

The tracker update can be adjusted in seconds. You can set a different interval for when the vehicle is in motion and when it is stationary. The default interval for movement is 20 seconds and for when it is stationary is also 20 seconds.

TIMER,20,20#

3. Angle Update

This setting allows the tracker to update its location based on a specific angle. For example, you can set it to update every 30 degrees and every 2 seconds.

ANGLEREP,ON,30,2#

4. Heartbeat

The heartbeat interval can be adjusted in minutes. This determines how often the tracker sends information while the vehicle is on or off. For example, you can set the device to send data every 1 minute with the ignition on and every 55 minutes with the ignition off.

HB,1,55#

5. Server Configuration

It is necessary to configure the server and port so that the tracker can connect to the tracking platform. The following commands configure the default server.

SERVER,1,central.trackar.com.br,5023,0#

6. Carrier APN Configuration

It is crucial that the APN, username, and password information are updated correctly, as they vary according to the chip provider and the carrier used. Below are the available APN commands.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Force Position Sending

If necessary, you can force the device to send its positions for 5 minutes, which can be useful in specific situations.

LJDW#

Special commands

1. Special Commands

The following special commands allow you to query settings, status, and other functionalities of the tracker. They are useful for managing the device effectively.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#