SMS Commands for Concox EV02 Tracker

Introduction to SMS Commands for the Concox EV02 Tracker

The Concox EV02 tracker is a powerful tool for real-time monitoring, ideal for those seeking efficiency and security in locating vehicles and assets. SMS commands are a practical way to interact with the device, allowing you to perform various functions directly by sending text messages. It is important to know when to use these commands, as they are crucial for the effective management of the tracker.

Before using the SMS commands, ensure that your device is properly configured and that you have the correct access password. The security of this password is essential, as it ensures that only authorized users can send commands to the tracker and access sensitive information. Keep the password in a safe place and avoid sharing it unnecessarily.

SMS commands can be used in various situations, such as changing settings, requesting the current location, or activating specific functions of the Concox EV02. Familiarize yourself with the list of available commands and their respective functionalities to optimize the use of your tracker.

For an even more complete experience, consider using the Trackar platform, which offers a one-time payment and provides efficient and practical management of your device. Make the most of your Concox EV02!

SMS Commands

1. Time Zone Configuration

To ensure the tracker functions correctly, it is essential to set the time zone. The command must be sent to adjust the device's time to GMT.

GMT,W,0,0#

2. Update Interval Adjustment

The update interval can be set in seconds. The first value (X) determines the transmission interval while the vehicle is in motion, and the second (Y) while it is stationary. This adjustment is crucial for optimizing data usage and tracker efficiency.

TIMER,20,20#

3. Angle-Based Update

The tracker can be configured to update its location based on a specific angle. For example, by setting an angle of 30 degrees and a detection time of 2 seconds, the tracker will update its position whenever these parameters are met.

ANGLEREP,ON,30,2#

4. Heartbeat Configuration

The heartbeat is a feature that allows adjustment of the tracker’s transmission interval. The first value indicates the time in minutes with the ignition on, and the second, the time with the ignition off. This helps save battery when the vehicle is not in use.

HB,1,55#

5. Server and DNS Configuration

For the tracker to function correctly, it is necessary to configure the server and port. The command should include the information of the server being used for tracking.

SERVER,1,central.trackar.com.br,5023,0#

6. Carrier APN Configuration

Configuring the APN is essential for the tracker to connect to the carrier's network. It is important to enter the correct APN, username, and password information, as they vary according to the chip provider and the carrier used.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Force Position Sending

If you need an immediate sending of positions, it is possible to force the device to send data for a period of 5 minutes. This command can be useful in emergency situations or when you want more frequent tracking temporarily.

LJDW#

Special commands

Special Commands

Special commands allow access to various functionalities of the tracker, such as querying settings, status, and manipulating the satellite receiver.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

Attention: Some commands may consume more battery of the vehicle.