SMS Commands for Coban TW-MD1101 Tracker
Introduction to SMS Commands for the Coban TW-MD1101 Tracker
The Coban TW-MD1101 tracker is a powerful tool for monitoring and tracking vehicles and objects. By using SMS commands, you can access various functionalities of this device quickly and easily. Before you start using the commands, it's important to ensure that you have an active SIM card in the tracker and that you are aware of your carrier's SMS sending fees.
Security is a crucial aspect when using SMS commands. Therefore, it is recommended that you set up an access password, thus protecting your information and preventing third parties from interfering with your tracker operations. Additionally, it is good to keep a secure record of your passwords and access data.
SMS commands allow you to perform actions such as querying real-time location, setting alerts, and much more. By understanding how and when to use these commands, you maximize the efficiency of your Coban TW-MD1101, ensuring effective monitoring.
To further facilitate your tracking, consider using the Trackar platform, which offers a one-time payment service for tracking management, making your experience even more complete.
SMS Commands
1. Start of Equipment Configuration
To begin configuring your GPS tracker, send the initial command. This is the first essential step to ensure that the device functions correctly.
begin123456
2. Time Zone Configuration
Adjust the time zone of the tracker so that it correctly records the local time. Use the appropriate command to set the desired time zone.
time zone123456 0
3. Carrier APN Configuration
It is crucial to enter the correct APN, username, and password information, as this data varies according to the chip carrier used. Make sure to use the appropriate commands for your carrier.
apn123456 allcom.br
apn123456 linksolutions.br
apn123456 m2data.arqia.br
apn123456 smart.m2m.vivo.com.br
apn123456 tim.br
apn123456 transmeet.br
apn123456 virtueyes.com.br
apn123456 zap.vivo.com.br
4. DNS and Port Configuration
Set the DNS servers that the tracker will use. It is important to ensure that this data is correct for effective communication.
Server 01, Server 02, Server 03: fill in with the appropriate information.
5. Vibration Alarm Activation
Configure the vibration alarm so that the tracker notifies about any unexpected movement. This can be essential for security.
shock123456
6. Tracking Activation
Activate the tracking function so that the device begins to monitor the location in real time. This command is essential for the tracker to function.
tracker123456
7. GPRS Transmission Activation
Enable data transmission via GPRS so that the tracker can send location and status information. This is vital for continuous communication.
gprs123456
8. Transmission Time Setting
Adjust the data transmission time while the equipment is in motion. A 60-second interval is recommended for efficient monitoring.
upload123456 060
The transmission time is adjustable as needed.
9. Sensor Sleep Mode
This mode allows the tracker to enter sleep mode after 5 minutes of inactivity, saving energy. The device will be activated upon detecting movement, receiving an SMS, or a call.
sleep123456 shock
Special commands
Special Commands
Below are some special commands that can be used for additional functionalities of the tracker.
G123456#
where
gprs123456 0
sensitivity123456 + selecionar número 1, 2 ou 3!
check123456
speed123456 080
nospeed123456
shock123456
noshock123456
lowbatsms123456 on
sleep123456 time
sleep123456 shock
sleep123456 off
imei123456
reset123456
Own your tracking platform with a one-time payment