SMS Commands for Coban TK905 Tracker

Introduction to SMS Commands for the Coban TK905 Tracker

The Coban TK905 tracker is a powerful and versatile tool for monitoring vehicles and assets. One of the most important features of this device is its ability to communicate via SMS commands, allowing users to perform various functions remotely. In this context, it is crucial to understand when and how to use these commands, as well as the necessary prerequisites to ensure their effectiveness.

Before using the SMS commands, it is essential that the user has knowledge of the initial configuration of the device and that the access password is properly set. The security of the password is a vital aspect, as it ensures that only authorized users can access and control the tracker. Therefore, it is recommended to use strong passwords and to change them periodically to prevent unauthorized access.

Additionally, sending SMS commands must be done from a previously authorized number, ensuring that only trusted users can interact with the device. This not only increases security but also the reliability of the tracking.

If you are looking for an effective monitoring solution, consider the Trackar platform, which offers a one-time payment and a complete tracking experience for your Coban TK905.

SMS Commands

1. Start Equipment Configuration

To initiate the configuration of the tracker, you must send the initial command. This allows the device to start accepting subsequent settings.

begin123456

2. Set Time Zone

Adjust the time zone of the tracker to ensure that location data is correct in relation to local time. Use the appropriate command to set the desired time zone.

time zone123456 0

3. Configure Carrier APN

Configuring the APN (Access Point Name) is crucial for the tracker's connectivity. Make sure to enter the correct APN, username, and password information, which varies according to the carrier used.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

4. Set DNS and Port

To ensure the tracker works correctly, it is necessary to configure the DNS servers and corresponding ports. Enter the required information for these fields.

Server 01, Server 02, Server 03: details to be filled in.

5. Activate Vibration Alarm

Activate the vibration alarm of the tracker so that it can detect any unwanted movement. This configuration is essential for the device's security.

shock123456

6. Activate Tracking

Enable the tracking function of the device. This will allow you to locate the tracker in real-time.

tracker123456

7. Activate GPRS Transmission

For the tracker to send location data, it is necessary to activate transmission via GPRS. Use the corresponding command for this configuration.

gprs123456

8. Set Transmission Time

Adjust the time interval for data transmission while the tracker is in motion. The default is 60 seconds, but it can be adjusted as needed.

upload123456 060

Adjustable time.

9. Sleep Mode by Sensor

The tracker enters sleep mode after 5 minutes of inactivity. It will be activated again upon detecting any movement, vibration, or call. This function helps to save battery.

sleep123456 shock

Wake-up mode: Movement, SMS or CALL.

Special commands

10. Special Commands

Here are some additional commands that can be used to manage the tracker more effectively.

G123456#

where

gprs123456 0

sensitivity123456 + selecionar número 1, 2 ou 3!

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456