SMS Commands for the Coban TK103B Tracker
Introduction to SMS Commands for the Coban TK103B Tracker
The Coban TK103B tracker is a powerful tool for monitoring vehicles and assets, allowing users to access a range of functionalities through SMS commands. These commands are essential for managing the device's settings, such as enabling real-time tracking, defining safe geographical areas, and controlling alarms. To use these commands effectively, it is important to be aware of the prerequisites, such as having an active SIM card in the device and ensuring that the default password is changed to enhance security.
Password protection is a critical aspect of using the Coban TK103B, as unauthorized access can compromise the security of the tracker's data. Changing the default password to a strong combination is recommended to prevent third parties from manipulating the device's settings. Additionally, it is important to have a basic understanding of how to send SMS messages and to comprehend the structure of the commands, as they must be formatted correctly for the tracker to respond as expected.
Explore the potential of your Coban TK103B tracker and maximize its security and efficiency. For an even more comprehensive tracking experience, consider the Trackar platform, which offers a one-time payment solution.
SMS Commands
1. Start Equipment Setup
To begin using the GPS tracker, it is essential to start the equipment setup. This will ensure that all functionalities are available and working correctly.
begin123456
2. Set Time Zone
Adjusting the time zone of the tracker is crucial for accurate location information. You should set the time zone according to your current location.
time zone123456 0
3. Configure Carrier APN
Configuring the APN (Access Point Name) is essential for the tracker to connect to the carrier's network. It is important to enter the correct information, which may vary depending on the chip provider and the carrier used.
apn123456 allcom.br
apn123456 linksolutions.br
apn123456 m2data.arqia.br
apn123456 smart.m2m.vivo.com.br
apn123456 tim.br
apn123456 transmeet.br
apn123456 virtueyes.com.br
apn123456 zap.vivo.com.br
Make sure to enter the correct APN to ensure connectivity.
4. Configure DNS and Port
It is necessary to configure the DNS servers and the port to ensure that the tracker functions properly. Enter the information as needed.
Server 01, Server 02, and Server 03 must be filled with the appropriate data.
5. Activate Vibration Alarm
The vibration alarm is an important feature that alerts about unexpected movements. Activate this feature for greater security.
shock123456
6. Activate Tracking
For the tracker to start monitoring the location in real-time, it is necessary to activate the tracking function.
tracker123456
7. Activate GPRS Transmission
Data transmission via GPRS must be activated for the tracker to send location information to the monitoring platform.
gprs123456
8. Set Transmission Time
You can adjust the interval at which the tracker will send location data. The default is 60 seconds while the equipment is in motion.
upload123456 060
The transmission time configuration should be done according to the monitoring needs.
9. Sleep Mode by Sensor
This mode allows the tracker to enter power-saving mode after 5 minutes of inactivity. The device will be activated by any movement, vibration, or incoming call.
sleep123456 shock
The tracker can be awakened through movement, SMS, or call.
Special commands
10. Special Commands
There are special commands that can be used for additional functionalities of the tracker. Check below.
G123456#
where
gprs123456 0
sensitivity123456 + selecionar número 1, 2 ou 3!
check123456
speed123456 080
nospeed123456
shock123456
noshock123456
lowbatsms123456 on
sleep123456 time
sleep123456 shock
sleep123456 off
imei123456
reset123456
These commands allow you to customize and optimize the use of the tracker.
Own your tracking platform with a one-time payment