SMS Commands for Coban TK103 Tracker

Introduction to SMS Commands for Coban TK103 Trackers

The Coban TK103 is a highly effective GPS tracker designed to provide a practical and secure solution for real-time monitoring. One of the main features of this device is the SMS commands, which allow users to interact directly with the tracker through text messages. These commands are essential for configuring and managing the device, enabling actions such as activating functions, locating, and adjusting settings.

To use the SMS commands, it is important that the user has a basic understanding of how to send and receive text messages, as well as being aware of prerequisites, such as the initial setup of the device and inserting an active SIM card. The security of the information is a crucial aspect; therefore, it is recommended that users set a strong password to prevent unauthorized access to the tracker.

Using the SMS commands of the Coban TK103 not only enhances the functionality of the device but also provides an additional layer of control and security for those wishing to monitor vehicles or valuable objects. To further optimize your experience, consider integrating your tracker with the Trackar platform, which offers a one-time payment service for efficient and accessible monitoring.

SMS Commands

1. Start Equipment Configuration

To start using your Coban TK103 tracker, it is essential to begin the device configuration. The first step is to send the start command, which prepares the tracker to receive the next configurations.

begin123456

2. Time Zone Configuration

The next step is to adjust the tracker’s time zone. It is crucial that the time zone is correct for the location information to be accurate and relevant.

time zone123456 0

3. Carrier APN Configuration

Configuring the APN is crucial for the tracker’s operation. It is important that the APN, username, and password information are entered correctly, as they vary according to the carrier of the chip used. Below are the commands for different APNs.

apn123456 algar.com.br

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 conect.algar.br

apn123456 conexao.getrak.com.br

apn123456 core.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 federal.br

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 hinova.br

apn123456 jbgprs.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.claro.com.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2track.br,vivo,vivo#

apn123456 meta.vivo.com.br

apn123456 mgdata.claro.com.br

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 ss.claro.com.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 upchip.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

To ensure that the tracker connects correctly to the server, it is necessary to configure the DNS servers and ports. This ensures that the information is transmitted effectively.

dns123456 central.trackar.com.br 6001

5. Tracking Mode

Activate the device's tracking mode so that it starts sending location information. This command is essential for the tracker’s operation.

tracker123456

6. Enable GPRS Transmission

Activate data transmission via GPRS, allowing the tracker to send location and status information in real-time.

gprs123456

7. Force GPRS Transmission

Use this command to force data transmission via GPRS, ensuring that the tracker sends information immediately.

gprs123456 on

8. Smart Tracking Mode

Activate smart tracking mode to optimize the chip's data usage. This mode adjusts the transmission time based on the vehicle's state, saving data when the vehicle is stationary.

fix060s055m***n123456

9. Position Sending by Angle

Configure position sending based on a specific angle. It is important to adjust the angle correctly to ensure the accuracy of the information sent.

angle123456 020

Some versions do not accept the zero at the beginning. If a format error occurs, use the command without the leading zero, for example: angle123456 20.

10. Activate Fuel Sensor

Activate the fuel sensor status to improve the transmission of data from digital sensors. This helps monitor the fuel level and other vehicle parameters.

protocol123456 18

11. Turn on Data Saving

Activate data saving so that the tracker stops sending information when the vehicle has been stationary for more than 10 minutes. It will resume sending data as soon as the vehicle moves or an alarm is triggered.

less gprs123456 on

12. GPS Shutdown

This command disables GPS updates when the vehicle is not moving, saving battery. Updates will resume automatically when the vehicle moves.

nosuppress123456

Special commands

Special Commands

Special commands allow you to query and control various functions of the tracker. Use them to check settings, restart the device, and manage tracking.

check123456

reset123456

fix030s***n123456

nofix123456

stop123456

resume123456

quickstop123456

noquickstop123456

imei123456

localization123456

address123456

acc123456

noacc123456

gprs123456,0,0

gprs123456,1,1

less gprs123456 off

sleep123456 shock

nosleep123456

arm123456

lowbattery123456 on

lowbattery123456 off

extpower123456 on

extpower123456 off

clear123456

distance123456 0050

password + senha_antiga + espaço + senha_nova

resetar senha

The GSM signal must be greater than 10 to ensure connection to the server.