SMS Commands for Coban TK102-2 Tracker

Introduction to SMS Commands for the Coban TK102-2 Tracker

The Coban TK102-2 tracker is a powerful tool for monitoring vehicles and objects, offering a range of functionalities through SMS commands. Knowing when and how to use these commands is essential to maximize the device's efficiency. SMS commands are particularly useful in situations where data connection is not available or when you want more direct control over the tracker.

Before using the commands, it is important to ensure that your device is correctly installed and that you have the authorized phone numbers to communicate with the tracker. Additionally, password security is a crucial aspect; it is recommended to change the default password and choose a strong combination to avoid unauthorized access. Protecting your information is fundamental, especially in tracking applications.

Finally, remember that the Trackar platform offers a practical and secure solution for managing your Coban TK102-2 tracker, with a one-time payment and no surprises. Try it out and make the most of your device's functionalities!

SMS Commands

1. Start Equipment Configuration

To start using the Coban TK102-2 tracker, it is essential to initiate the device configuration. Use the command below to begin the configuration process.

begin123456

2. Timezone Configuration

It is necessary to adjust the timezone of the tracker to ensure that location data is accurate. Use the command below to perform this configuration.

time zone123456 0

3. Carrier APN Configuration

Configuring the APN is crucial for the tracker to connect to the carrier's network. The APN, username, and password information must be updated with the correct data, as they vary according to the chip supplier and the carrier used.

apn123456 algar.com.br

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 conect.algar.br

apn123456 conexao.getrak.com.br

apn123456 core.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 federal.br

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 hinova.br

apn123456 jbgprs.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.claro.com.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2track.br,vivo,vivo#

apn123456 meta.vivo.com.br

apn123456 mgdata.claro.com.br

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 ss.claro.com.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 upchip.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

Choosing the correct APN is essential for the proper functioning of the tracker.

4. DNS and Port Configuration

It is important to correctly configure the DNS servers for the tracker to function properly. Use the commands below to set the DNS servers.

dns123456 central.trackar.com.br,5006

5. Tracking Mode

Activate the tracking mode so that the device starts sending location data. The command below activates this function.

tracker123456

6. Enable GPRS Transmission

Activate GPRS transmission to ensure that data is sent correctly. Use the command below to enable this function.

gprs123456

7. Force GPRS Transmission

If necessary, you can force GPRS transmission using the command below. This can be useful in specific situations.

gprs123456 on

8. Smart Tracking Mode

The smart tracking mode allows the tracker to save data by adjusting the transmission time. The command below configures this mode.

fix060s055m***n123456

This mode sets the transmission time to 60 seconds with the ignition on and 55 minutes with the ignition off.

9. Position Sending by Angle

Adjust the angle for sending position. It is possible to set the angle in degrees. Remember that some versions may not accept zero at the beginning.

angle123456 020

If there is an error when sending, use a 3-digit number without leading zero.

10. Activate Fuel Sensor Status

Activate the fuel sensor status to improve the transmission of digital sensor data. Use the command below.

protocol123456 18

11. Activate Data Saving

When the vehicle is stopped for more than 10 minutes, the tracker will stop sending the position. It will resume sending data as soon as the vehicle moves or an alarm is triggered.

less gprs123456 on

12. GPS Shutdown

The tracker will stop updating GPS data when the vehicle is not moving. The data will be updated again as soon as the vehicle moves.

nosuppress123456

Special commands

1. Check Settings

To check the settings of the tracker, use the command below. This will provide important information about the device's status.

check123456

The response will include information such as battery status, GPRS connection, GPS signal, among others. ### 2. Restart Tracker

If necessary, you can restart the tracker using the command below. This can help resolve connection issues.

reset123456 ### 3. Continuous Tracking Mode

Activate continuous tracking mode for constant data transmission. The command below adjusts the transmission time.

fix030s***n123456

This mode sets the transmission time to 30 seconds. ### 4. Turn Off Tracking Mode

If you need to stop tracking, use the command below to deactivate this function.

nofix123456 ### 5. Lock Vehicle

Activate the vehicle lock function using the command below. This function can be useful in security situations.

stop123456 ### 6. Unlock Vehicle

To unlock the vehicle, use the command below. This action reverts the previous lock.

resume123456 ### 7. Activate Immediate Lock Function

If you need an immediate vehicle lock, use the command below.

quickstop123456 ### 8. Deactivate Immediate Unlock Function

To deactivate the immediate unlock function, use the command below.

noquickstop123456 ### 9. Check IMEI

To check the device's IMEI, use the command below.

imei123456 ### 10. Location Link

To obtain the tracker location link, use the command below.

localization123456 ### 11. Request Address by Latitude and Longitude

Send the command below to request an address based on latitude and longitude coordinates.

address123456 ### 12. Activate Key Alarm

Activate the vehicle alarm using the command below.

acc123456 ### 13. Deactivate Key Alarm

To turn off the key alarm, use the command below.

noacc123456 ### 14. TCP Mode

Activate the TCP mode of the tracker using the command below.

gprs123456,0,0 ### 15. UDP Mode

Activate the UDP mode of the tracker using the command below.

gprs123456,1,1 ### 16. Turn Off Data Saving

To deactivate data saving, use the command below.

less gprs123456 off ### 17. Enter Sleep Mode

Activate sleep mode due to lack of movement using the command below.

sleep123456 shock ### 18. Turn Off Sleep Mode

To deactivate sleep mode, use the command below.

nosleep123456 ### 19. Activate Door Sensor

Activate the door sensor using the command below.

arm123456 ### 20. Activate Low Battery Alarm

Activate the low battery alarm using the command below.

lowbattery123456 on ### 21. Turn Off Low Battery Alarm

To deactivate the low battery alarm, use the command below.

lowbattery123456 off ### 22. Activate Power Cut Alarm

Activate the power cut alarm using the command below.

extpower123456 on ### 23. Turn Off Power Cut Alarm

To deactivate the power cut alarm, use the command below.

extpower123456 off ### 24. Clear Tracker Internal Memory

To clear the internal memory of the tracker, use the command below.

clear123456 ### 25. Send Position by Distance

Configure position sending by distance using the command below. The number must be 4 digits and defines the distance in meters.

distance123456 0050

This command overrides the smart tracking mode. ### 26. Change Default Password of Tracker

If you wish to change the default password of the tracker, use the command below, replacing the old password with the new one.

password + senha_antiga + espaço + senha_nova (ex: password123456 999999)

Ensure that the new password is secure. ### 27. Reset Password

If you need to reset the tracker password, use the command below.

reset senha

The GSM signal must be greater than 10 to connect to the server.