SMS Commands for Coban LK610 Tracker

Introduction to SMS Commands for the Coban LK610 Tracker

The Coban LK610 tracker is a powerful tool for vehicle monitoring, offering a range of functionalities through SMS commands. These commands allow users to perform practical actions, such as real-time tracking and security parameter configuration. Before using these commands, it is essential to be aware of the prerequisites, such as device activation and the correct configuration of the authorized phone number to receive responses.

Security is a fundamental aspect when working with SMS commands. It is crucial to protect the access password to the device, ensuring that only authorized users can send commands and receive sensitive information. Use strong passwords and keep them in a safe place to avoid unauthorized access.

It is recommended to use the Trackar platform, which offers a one-time payment and facilitates the management of your Coban LK610 tracker, maximizing its functionalities and security.

SMS Commands

1. Start of Equipment Setup

To start using your tracker, you need to begin the device configuration. This ensures that all functions are operational and that the tracker is ready for use.

begin123456

2. Time Zone Configuration

Adjusting the time zone is essential to ensure that location data is accurate. Use the appropriate command to set the desired time zone.

time zone123456 0

3. Carrier APN Configuration

Configuring the APN is crucial, as the information may vary depending on the SIM card carrier used. Make sure to enter the correct data to ensure tracker connectivity.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

It is important to correctly configure the DNS server and port to ensure communication between the tracker and the central server. Use the following commands to perform this configuration.

SZCS,123456,DOMAIN=central.trackar.com.br:6013

5. Enable GPRS Transmission

Activate data transmission via GPRS so that the tracker can send location and status information. This is essential for the device's operation.

gprs123456

6. Tracking Mode

Activate tracking mode so that the device begins to monitor location in real-time. This mode is fundamental for the main functionality of the tracker.

tracker123456

7. Transmission Time Configuration

Set the interval at which the tracker will send location updates. A time of 60 seconds is recommended for effective tracking.

upload123456 60

8. Activate Vibration Alarm

Configure the vibration alarm so that the tracker can detect unexpected movements and alert you about possible interferences.

shock123456

9. Sleep Mode by Sensor

The tracker can enter hibernation mode after 5 minutes of inactivity. It will be activated again upon detecting any movement or vibration.

sleep123456 shock

Special commands

Special Commands

Use the special commands below to access additional functions and information from the tracker.

G123456

where

check123456

(s42,1234)

status

Param1

Param2

sos

sleep123456 10

sleep123456 shock

nosleep12345

shock123456

noshock123456

pwr1

pwr0

555

666

imei123456

rst

format