SMS Commands for Coban LK206B Tracker

Introduction to SMS Commands for the Coban LK206B Tracker

The Coban LK206B tracker is a powerful tool for vehicle and asset monitoring, offering a series of SMS commands that allow the user to manage and configure the device efficiently. Using SMS commands is a common and practical way to interact with the tracker, especially in situations where access to the monitoring platform may not be available.

To start using SMS commands, it is essential to meet some prerequisites, such as ensuring that the device is properly installed and that the SIM card is active and functioning. Additionally, the security of the access password is crucial; it is recommended that users choose strong passwords and keep them secret to avoid unauthorized access to the system.

This technical guide provides an overview of using SMS commands, allowing you to make the most of your Coban LK206B's features. Remember to consult the specific documentation for the device for a more detailed understanding of each command and its applications. For an even more robust monitoring solution, consider the Trackar platform, which offers a one-time payment and advanced features to optimize your tracking experience.

SMS Commands

1. Start of Configuration

To begin the tracker configuration, send the initial command. This step is crucial to activate the device and allow the other settings to be applied correctly.

begin123456

2. Time Zone Configuration

Adjust the device's time zone to ensure that location data is accurate. This is crucial for the synchronization of tracking information.

time zone123456 0

3. APN Configuration

Configuring the APN is essential for the tracker to connect to the carrier's network. Enter the correct data according to the chip provider used. APN information may vary by supplier.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

Remember to replace the APN information as needed.

4. DNS Server and Port Configuration

It is important to set the DNS server and port to ensure that the tracker connects correctly to the monitoring system. This configuration is essential for the proper functioning of the tracker.

SZCS,123456,DOMAIN=central.trackar.com.br:6013

5. GPRS Transmission Activation

Activate GPRS transmission so that the tracker can send location and status data. This configuration is essential for real-time tracking.

gprs123456

6. Tracking Mode Activation

Activate tracking mode so that the device begins monitoring location. This function is essential for the tracker to fulfill its main purpose.

tracker123456

7. Transmission Interval Configuration

Set the time interval for data transmission. The default time is 60 seconds, but it can be adjusted as needed.

upload123456 60

8. Vibration Alarm Activation

Activate the vibration alarm so that the tracker can detect impacts. This functionality is important to alert about possible thefts or damage to the device.

shock123456

9. Sensor Sleep Mode Configuration

Configure the tracker to enter sleep mode after 5 minutes of inactivity. The device will be activated again with any movement or vibration.

sleep123456 shock

Special commands

Special Commands

Below are special commands that can be used for various functions on the tracker.

G123456

where

check123456

(s42,1234)

status

Param1

Param2

sos

sleep123456 10

sleep123456 shock

nosleep12345

shock123456

noshock123456

pwr1

pwr0

555

666

imei123456

rst

format