SMS Commands for Coban GPS303-G Tracker
Introduction to SMS Commands for the Coban GPS303-G Tracker
SMS commands are an essential tool for the effective operation of the Coban GPS303-G tracker. They allow you to have full control over the device, enabling real-time adjustments and access to crucial information about the location of your vehicle or tracked object. It is important to understand when and how to use these commands to maximize the efficiency of your tracker.
Before you start using the SMS commands, it is necessary to meet some prerequisites, such as ensuring that the SIM card is active and that the device is correctly installed and configured. Additionally, the security of the password used is fundamental; it is recommended to choose a strong password and keep it confidential to prevent unauthorized access to the tracking system.
By mastering the SMS commands, you will be able to monitor the location accurately, program alerts, and even modify device settings. The Coban GPS303-G tracker is an excellent choice for those seeking a reliable and functional tracking system. To enhance your experience, consider using the Trackar platform, which offers a one-time payment and advanced features to optimize the monitoring of your assets.
SMS Commands
1. Start Equipment Configuration
To begin using the device, initial configuration is necessary. This will ensure that all functions operate correctly.
begin123456
2. Time Zone Configuration
Adjusting the time zone is essential for the tracker to record the correct time. This command allows you to set the desired time zone.
time zone123456 0
3. Carrier APN Configuration
Configuring the APN (Access Point Name) is crucial to ensure the device's connectivity. APN, username, and password information must be entered correctly, as they vary by carrier.
apn123456 allcom.br
apn123456 linksolutions.br
apn123456 m2data.arqia.br
apn123456 smart.m2m.vivo.com.br
apn123456 tim.br
apn123456 transmeet.br
apn123456 virtueyes.com.br
apn123456 zap.vivo.com.br
Make sure to use the correct information from your carrier.
4. DNS and Port Configuration
To optimize the communication of the tracker, it is necessary to configure the DNS servers. Enter the addresses of the servers as needed.
Server 01, Server 02, Server 03: enter the appropriate values.
5. Vibration Alarm Activation
This command activates the vibration alarm of the tracker, which can be useful for alerts in specific situations.
shock123456
6. Activate Tracking
For the tracker to start monitoring the device's location, the tracking function must be activated.
tracker123456
7. GPRS Transmission Activation
Activate data transmission via GPRS so that the tracker can send location and status information.
gprs123456
8. Set Transmission Time
You can adjust the data transmission interval. The default is 60 seconds when the equipment is in motion.
upload123456 060
The time can be configured as needed.
9. Sleep Mode by Sensor
This mode allows the tracker to enter a power-saving state after 5 minutes of inactivity. Any movement or vibration will cause the device to return to the active state.
sleep123456 shock
The tracker can be activated by movement, SMS, or call.
Special commands
Special Commands
Here are some additional commands that may be useful for managing the tracker.
G123456#
where
gprs123456 0
sensitivity123456 + selecionar número 1, 2 ou 3!
check123456
speed123456 080
nospeed123456
shock123456
noshock123456
lowbatsms123456 on
sleep123456 time
sleep123456 shock
sleep123456 off
imei123456
reset123456
Own your tracking platform with a one-time payment