SMS Commands for Coban GPS104 Tracker
Introduction to SMS Commands for the Coban GPS104 Tracker
The Coban GPS104 tracker is a powerful tool for vehicle monitoring and tracking, offering various functionalities through the sending of SMS commands. These commands allow users to perform actions such as activating or deactivating tracking, querying real-time location, and configuring device parameters. It is essential to understand when and how to use these commands to maximize the efficiency of your tracker.
Before you start using SMS commands, it is important to ensure that you have met all prerequisites, such as the correct configuration of the device and activation of the SIM card. Additionally, the security of your password is paramount: make sure to use strong and unique passwords, avoiding sharing them with third parties. This will help protect your tracker from unauthorized access.
Proper use of SMS commands not only optimizes the operation of your Coban GPS104 but also ensures that you have full control over your vehicle at any time. For an even more complete and easy experience, consider the Trackar platform, which offers a one-time payment tracking service, making it easier to manage your device efficiently and securely.
SMS Commands
1. Start of Equipment Configuration
To begin using the tracker, it is necessary to start the device configuration. This will ensure that all functions are active and ready for use.
begin123456
2. Time Zone Configuration
Adjust the time zone of your tracker to ensure that location information is accurate. Use the appropriate command to set the desired time zone.
time zone123456 0
3. Carrier APN Configuration
It is essential to correctly configure the APN, username, and password, as this information varies depending on the chip carrier used. Verify the correct data before sending the commands.
apn123456 allcom.br
apn123456 linksolutions.br
apn123456 m2data.arqia.br
apn123456 smart.m2m.vivo.com.br
apn123456 tim.br
apn123456 transmeet.br
apn123456 virtueyes.com.br
apn123456 zap.vivo.com.br
4. DNS and Port Configuration
Configure the DNS servers and the port to ensure the connectivity of the tracker. It is important that this data is accurate for proper functioning.
Server 01, Server 02, Server 03 must be filled with the correct information.
5. Vibration Alarm Activation
Activate the vibration alarm so that the tracker can alert you in case of unexpected movements. This function is essential for safety.
shock123456
6. Tracking Activation
For the tracker to start functioning, it is necessary to activate the tracking function. This will allow you to monitor the device's location.
tracker123456
7. GPRS Transmission Activation
Enable GPRS transmission so that the tracker can send location data in real-time. This configuration is crucial for efficient tracking.
gprs123456
8. Transmission Time Definition
Set the time interval for data transmission. The default time is 60 seconds while the device is in motion.
upload123456 060
The time can be adjusted as needed.
9. Sleep Mode by Sensor
The tracker enters sleep mode after 5 minutes of inactivity. Any movement or vibration will cause the device to return to active mode.
sleep123456 shock
The activation mode can be by movement, SMS, or call.
Special commands
Special Commands
Below are some special commands that can be used for additional functionalities of the tracker.
G123456#
where
gprs123456 0
sensitivity123456 + selecionar número 1, 2 ou 3!
check123456
speed123456 080
nospeed123456
shock123456
noshock123456
lowbatsms123456 on
sleep123456 time
sleep123456 shock
sleep123456 off
imei123456
reset123456
Own your tracking platform with a one-time payment