SMS Commands for Coban GPS102 Tracker
Introduction to SMS Commands for the Coban GPS102 Tracker
The Coban GPS102 tracker is an advanced solution for vehicle monitoring, offering a variety of features that can be activated via SMS commands. These commands are essential for managing and optimizing the use of your device, allowing for real-time location tracking and adjustments to operational settings. To use these commands effectively, it is important to understand when and how to apply them, as well as ensuring that you are aware of the necessary prerequisites, such as the initial setup of the device and the availability of an active SIM card.
Security is a crucial aspect when sending SMS commands to your tracker. It is recommended that you use a secure password to protect your device from unauthorized access. Always keep your credentials in a safe place and avoid sharing sensitive information. With the right knowledge and the practice of good security measures, you will be able to fully explore the functionalities of the Coban GPS102.
To further optimize your tracking experience, consider the Trackar platform, which offers a one-time payment system to manage your operations simply and efficiently.
SMS Commands
1. Start GPS Configuration
To begin using the GPS tracker, it is necessary to initiate the device configuration process. This is essential to ensure that all functions operate correctly.
begin123456
2. Time Zone Configuration
Adjust the device's time zone so that location data is recorded correctly according to your region.
time zone123456 0
3. Configure Carrier APN
It is crucial to enter the correct APN settings, including username and password, as this information varies according to the chip provider and carrier. Check the available options below.
apn123456 allcom.br
apn123456 linksolutions.br
apn123456 m2data.arqia.br
apn123456 smart.m2m.vivo.com.br
apn123456 tim.br
apn123456 transmeet.br
apn123456 virtueyes.com.br
apn123456 zap.vivo.com.br
4. DNS and Port Configuration
In this step, you must configure the DNS servers and the necessary ports for the tracker communication. Make sure to enter the correct data.
Server 01, Server 02, Server 03: information to be entered.
5. Activate Vibration Alarm
This function allows the tracker to detect vibrations and activate an alarm if they occur. It is a useful security measure.
shock123456
6. Activate Tracking
For the tracker to start sending location information, it is necessary to activate the tracking function.
tracker123456
7. Enable GPRS Transmission
Enable data transmission via GPRS so that the tracker can send real-time location information.
gprs123456
8. Set Transmission Time
You can adjust the time interval between the tracker transmissions. The default is 60 seconds while the device is in motion.
upload123456 060
9. Sleep Mode by Sensor
The tracker will enter hibernation mode after 5 minutes without movement. Any vibration or movement will reactivate it. You can wake it up by movement, SMS, or call.
sleep123456 shock
Special commands
Special Commands
Here are some special commands that may be useful for managing your tracker.
G123456#
where
gprs123456 0
sensitivity123456 + selecionar número 1, 2 ou 3!
check123456
speed123456 080
nospeed123456
shock123456
noshock123456
lowbatsms123456 on
sleep123456 time
sleep123456 shock
sleep123456 off
imei123456
reset123456
Own your tracking platform with a one-time payment