SMS Commands for Coban GPS-103 Tracker
Introduction to SMS Commands for the Coban GPS-103 Tracker
SMS commands are an essential tool for the efficient management of the Coban GPS-103 tracker. They allow users to perform various monitoring and control functions of the device quickly and conveniently. Before using these commands, it is important to be aware of some prerequisites, such as the correct configuration of the device and the inclusion of the authorized phone number for sending commands. Additionally, the security of the password used is crucial; it is recommended to always opt for strong and unique passwords to avoid unauthorized access.
Using SMS commands is indicated for situations where access to the online monitoring interface is not feasible, providing a reliable and efficient alternative. By employing SMS commands, you can optimize the use of your Coban GPS-103, ensuring more effective control over its functionalities.
To maximize your tracking experience, consider using the Trackar platform, which offers a one-time payment service, allowing access to advanced features and continuous support for your tracker. Make the most of your Coban GPS-103 and stay one step ahead in the security and monitoring of your assets.
SMS Commands
1. Start of Configuration
To begin the configuration of your GPS tracker, you must send a specific command that activates the system. This step is crucial for the device to start operating correctly.
begin123456
2. Time Zone Configuration
Adjust the time zone of your device to ensure that the location information is correct. This command should be sent after the initial activation.
time zone123456 0
3. APN Configuration
It is essential to configure the correct APN of the carrier used. The APN, username, and password information may vary according to the carrier, so make sure to use the correct data.
apn123456 allcom.br
apn123456 linksolutions.br
apn123456 m2data.arqia.br
apn123456 smart.m2m.vivo.com.br
apn123456 tim.br
apn123456 transmeet.br
apn123456 virtueyes.com.br
apn123456 zap.vivo.com.br
4. DNS and Port Configuration
In this step, you must configure the DNS servers that the tracker will use. It is important to have the correct data to ensure the communication of the device.
Server 01, Server 02, Server 03: information to be filled in.
5. Vibration Alarm Activation
Activate the vibration alarm so that the device can detect unwanted movements. This feature is essential for the safety of the tracker.
shock123456
6. Tracking Activation
For the tracker to start sending location information, you must activate the tracking function. This command is essential for the operation of the device.
tracker123456
7. GPRS Transmission Activation
Activate data transmission via GPRS to allow the tracker to send information in real-time. This configuration is fundamental for continuous monitoring.
gprs123456
8. Transmission Time Setting
Configure the time interval for data transmission. The default is 60 seconds, and you can adjust it as needed.
upload123456 060
The time can be adjusted as needed.
9. Sensor Sleep Mode
The tracker enters power-saving mode after 5 minutes of inactivity. It can be activated again by movement, SMS, or call.
sleep123456 shock
Special commands
10. Special Commands
Here are some special commands that can be used for additional functionalities of the tracker.
G123456#
where
gprs123456 0
sensitivity123456 + selecionar número 1, 2 ou 3!
check123456
speed123456 080
nospeed123456
shock123456
noshock123456
lowbatsms123456 on
sleep123456 time
sleep123456 shock
sleep123456 off
imei123456
reset123456
Own your tracking platform with a one-time payment