SMS commands for CCTR CCTR-810 tracker

Introduction to SMS Commands for the CCTR CCTR-810 Tracker

The CCTR CCTR-810 tracker is a robust solution for vehicle monitoring and location, offering a range of functionalities that can be accessed via SMS commands. These commands are essential for users who wish to interact quickly with the device, allowing actions such as real-time tracking, parameter configuration, and much more.

Before using the SMS commands, it's important to ensure that all prerequisites are met, such as activating the SIM card and the initial configuration of the device. Additionally, the security of the password used in the commands should not be underestimated; it is recommended to change the default password to avoid unauthorized access and ensure the integrity of the information.

With the CCTR-810, the ease of use of the SMS commands makes the user experience even more practical, allowing efficient and real-time control over your vehicle. For a more comprehensive management and additional functionalities, consider exploring the Trackar platform, which offers a one-time payment system to easily and securely track your device.

SMS Commands

1. Restore Factory Settings

To return the device to its original factory state, use the appropriate command. This ensures that all custom settings are removed.

FACTORY*123456

2. Time Zone Configuration

Adjust the tracker’s time zone to ensure that recorded times are accurate. This command is essential for operations in different regions.

TIMEZONE*123456*0

3. Configure Carrier APN

APN settings must be adjusted according to the carrier of the SIM card used. It is crucial to enter the correct information to ensure the tracker’s connectivity.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Remember that APN information varies according to the chip supplier and carrier.

4. Set DNS and Port

Define the DNS servers and communication port to ensure the tracker connects correctly to the monitoring platform.

IP*123456*central.trackar.com.br,5040

5. Tracking Mode

Choose between the available tracking modes. The default mode keeps the device always active, while the shock control mode activates and deactivates the tracker according to movement.

MODE*123456*1

MODE*123456*2

Mode 1 is the default, while mode 2 saves battery by turning off the tracker when not in motion.

6. Set Upload Interval

Adjust the time in seconds for the data upload interval. The minimum interval is 30 seconds and the maximum is 999 seconds.

INTERVAL*123456*60

The factory default is 30 seconds.

Special commands

Special Commands

Use special commands to perform additional functions and maintain control of the tracker.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456