SMS Commands for CCTR CCTR-808 Tracker

Introduction to SMS Commands for the CCTR-808 Tracker

The CCTR-808 tracker is a versatile and effective tool for monitoring vehicles and assets, allowing users to activate various features through SMS commands. These commands are especially useful in situations where access to an application interface may be limited, providing a practical and quick alternative for management and tracking.

Before using the SMS commands, it is essential to ensure that you have the necessary prerequisites, such as an active SIM card in the device and the correct configuration of the authorized phone number. Additionally, password security is a critical point; users are advised to choose strong passwords and keep them confidential to avoid unauthorized access to the tracker.

Using the SMS commands of the CCTR-808 can be an efficient solution for real-time monitoring, but it should be done responsibly and with attention to good security practices.

To optimize your tracking experience, consider the Trackar platform, which offers a one-time payment solution, ideal for those who want complete and simplified management of their assets. Explore the possibilities and maximize the effectiveness of your CCTR-808 tracker!

SMS Commands

1. Restore Factory Settings

To restore the factory settings of your device, send the appropriate command. This will reset all settings to the original defaults.

FACTORY*123456

2. Set Time Zone

Adjust the time zone of the tracker by sending the corresponding command. This is essential to ensure that location data is accurate according to your region.

TIMEZONE*123456*0

3. Configure Carrier APN

It is crucial to correctly configure the APN, username, and password, as this information varies by carrier. Make sure to use the correct data to ensure device connectivity.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Remember to replace the APN, username, and password values according to your carrier.

4. Set DNS and Port

Configure the DNS servers and port for the tracker communication. This is crucial to ensure that the device can connect correctly to the tracking server.

IP*123456*central.trackar.com.br,5040

5. Select Tracking Mode

Choose between the different available tracking modes. The standard mode works continuously, while the shock control mode activates the tracker only when in motion.

MODE*123456*1

MODE*123456*2

Mode 2 turns off the tracker after 5 minutes of inactivity, making it more battery-efficient.

6. Set Upload Interval

Adjust the time interval for data uploads. The interval can be set between 30 and 999 seconds, with 30 being the factory default. This affects how frequently the tracker sends data.

INTERVAL*123456*60

Special commands

Special Commands

Use special commands to perform additional actions on the tracker.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456

FACTORY*123456

These commands allow you to query settings, obtain information, and manage the device efficiently.