SMS commands for the CCTR CCTR-800G tracker

Introduction to SMS commands for the CCTR CCTR-800G tracker

The CCTR CCTR-800G tracker is a powerful tool for monitoring vehicles and other assets. By using SMS commands, you can interact with the device in a practical and efficient manner. It is important to understand when and how to use these commands to ensure maximum utilization of the device's features.

Before you start, check the prerequisites, such as the initial setup of the tracker and the activation of the SIM card. The security of your password is crucial; make sure to use strong passwords and keep them in a safe place to avoid unauthorized access. Additionally, keep in mind that SMS commands must be sent from a previously authorized number, ensuring that only trusted users can modify the tracker's settings.

Proper use of SMS commands can optimize the monitoring and management of your assets, providing real-time information and greater control over security. For an even more complete experience, consider integrating the CCTR CCTR-800G with the Trackar platform, which offers a one-time payment and various features to facilitate your monitoring.

SMS Commands

1. Restore Factory Settings

To restore the factory settings of the device, use the appropriate command. This is useful if you want to reset all settings to the original default.

FACTORY*123456

2. Timezone Configuration

Adjust the tracker’s timezone to ensure that location data is recorded correctly. The command should include the desired time setting.

TIMEZONE*123456*0

3. Configure Carrier APN

It is crucial that the APN, username, and password information is updated correctly, as they vary according to the chip provider and carrier. Use the commands below to set the necessary APNs.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Ensure that the information is correct to avoid connectivity issues.

4. Configure DNS and Port

Set the DNS servers and ports that the tracker will use to connect. This is important to ensure that the device can communicate correctly with the servers.

IP*123456*central.trackar.com.br,5015

5. Tracking Mode

Choose the tracking mode that best fits your needs. Mode 1 keeps the tracker always active, while Mode 2 saves battery by turning off the device when not in motion.

MODE*123456*1

MODE*123456*2

Consider using Mode 2 to save battery, but be aware that the tracker will not respond to commands when in standby mode.

6. Set Upload Interval

Adjust the data upload interval, which can be set between 30 and 999 seconds. Set a value that balances update frequency and battery consumption.

INTERVAL*123456*60

Special commands

7. Special Commands

Below are some special commands that can be used to manage the tracker effectively.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456

These commands are useful for checking settings, restarting the device, and maintaining connectivity.