SMS Commands for CCTR CCTR-622G Tracker

Introduction to SMS Commands for the CCTR-622G Tracker

The CCTR-622G tracker is a powerful tool for real-time monitoring and locating vehicles and objects. Using SMS commands is one of the effective ways to interact with the device, allowing you to access various functionalities quickly and conveniently. SMS commands are especially useful in situations where internet access is unavailable or when a simple communication method with the tracker is sought.

Before using SMS commands, it is essential to ensure that you meet some prerequisites. First, check that the tracker is properly installed and configured, and that it has an active SIM card with sufficient balance to send and receive messages. Security should also be a priority; make sure your password is set correctly and not shared with unauthorized individuals. This ensures that only you can access and control the functions of your tracker.

By mastering the use of SMS commands, you can optimize tracking and obtain valuable information about the location and status of your vehicle or monitored object. For an even more complete experience, consider the Trackar platform, which offers a one-time payment system for tracking management with additional functionalities. This way, you ensure precise and efficient control over your assets.

SMS Commands

1. Restore factory settings

To restore the device to factory settings, use the indicated command. This is essential if you need to reconfigure or troubleshoot the tracker.

FACTORY*123456

2. Set time zone

Adjusting the time zone is crucial to ensure that location information is accurate. Use the corresponding command to set the desired time zone.

TIMEZONE*123456*0

3. Carrier APN configuration

Correct APN configuration, along with the username and password, is crucial for the tracker to function. The information varies by carrier, so make sure to enter the correct data.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Remember to check if the APN is correct for the chip used.

4. Set DNS and Port

Define the DNS servers and port to ensure that the tracker connects correctly to the network. It is important that the addresses are correct to avoid communication issues.

IP*123456*central.trackar.com.br,5013

5. Select tracking mode

Choose between different tracking modes according to your needs. The standard mode allows continuous operation, while the shock control mode saves battery.

MODE*123456*1

MODE*123456*2

Mode 2 turns off the tracker after 5 minutes of inactivity.

6. Set upload interval

Adjust the upload time in seconds, with a minimum of 30 and a maximum of 999. The factory default is 30 seconds.

INTERVAL*123456*60

Special commands

7. Special commands

Use the special commands below to access additional settings and perform specific operations on the tracker.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456