SMS Commands for CCTR CCTR-622 Tracker

Introduction to SMS Commands for the CCTR CCTR-622 Tracker

SMS commands are an essential tool for optimizing the use of the CCTR CCTR-622 tracker, allowing users to obtain real-time information about the device's location and status. These commands can be used in various situations, such as monitoring vehicle security, tracking delivery routes, or ensuring the protection of valuable assets.

To use SMS commands effectively, it is necessary for the device to be properly configured and for the user to have access to the security password, which should be kept confidential to prevent unauthorized access. It is also recommended that the user be familiar with the functionalities of the CCTR CCTR-622, ensuring that each command sent produces the expected result.

The security of the password is a crucial aspect; therefore, it is advisable to periodically change it and use complex passwords to enhance protection against potential intrusions. By following these guidelines, you will be able to make the most of your tracker’s features.

For more efficient and practical management of your tracker, consider the Trackar platform, which offers a one-time payment solution to manage your tracking information securely and integratively.

SMS Commands

1. Restore Factory Settings

To reset the device to its original settings, use the specific command. This is useful when you want to start from scratch or troubleshoot configuration issues.

FACTORY*123456

2. Adjust Time Zone

It is essential to set the time zone correctly to ensure that tracking data is synchronized with local time. Use the designated command for this task.

TIMEZONE*123456*0

3. APN Configuration

APN settings vary by carrier and the SIM card used. It is crucial to enter the correct information to ensure an efficient data connection. See the necessary commands for each carrier.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Make sure to replace the APN, username, and password information as needed.

4. Set DNS and Port

To ensure the tracker connects correctly to the server, it is necessary to configure the DNS and port. Use the appropriate commands to set the desired servers.

IP*123456*central.trackar.com.br,5040

5. Select Tracking Mode

Choose between the available tracking modes. The default mode operates continuously, while the shock control mode activates the tracker only when in motion. Select the one that best meets your needs.

MODE*123456*1

MODE*123456*2

6. Set Upload Interval

The upload interval can be adjusted as needed, ranging from 30 to 999 seconds. The default is 30 seconds, but you can change it as desired.

INTERVAL*123456*60

Special commands

Special Commands

Here are some additional commands that can be used to manage and check the tracker settings.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456

FACTORY*123456