SMS Commands for CCTR CCTR-620+ Tracker

Introduction to SMS Commands for the CCTR CCTR-620+ Tracker

SMS commands are an essential tool for optimizing the functionality of the CCTR CCTR-620+ tracker. They allow users to send specific instructions to the device, enabling remote control and management of various settings. It is important to know when and how to use these commands, ensuring that you make the most of your tracker’s capabilities.

Before you start using the SMS commands, check the prerequisites, such as the initial setup of the device and the activation of the SIM card that must be inserted in the tracker. Additionally, password security is a crucial aspect. Make sure your password is set up robustly and not shared improperly, as this can compromise the integrity of the data and the security of your tracker.

With the CCTR CCTR-620+, you have a versatile device that, when used correctly, can provide valuable information about the location and status of your vehicle or tracked object. For an even more complete experience, consider the Trackar platform, which offers a one-time payment and additional features to maximize the use of your tracker.

SMS Commands

1. Factory Reset

To restore the device to factory settings, a specific command must be sent. This action will reset all custom settings and return the device to its original factory state.

FACTORY*123456

2. Time Zone Configuration

Adjusting the time zone is essential to ensure that the tracker correctly logs the times of activities. The following command should be used to set the desired time zone.

TIMEZONE*123456*0

3. Carrier APN Configuration

Configuring the APN is crucial for the proper functioning of the tracker. It is important to enter the correct APN, username, and password information, which vary according to the chip provider and the carrier used. Use the commands below to adjust the APN settings.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Check your carrier's information before configuring.

4. DNS and Port Configuration

To ensure the tracker connects to the server, the DNS servers must be configured correctly. The commands below should be used to set the IPs and ports.

IP*123456*central.trackar.com.br,5040

5. Tracking Mode

The tracker can operate in different modes, depending on your needs. The default mode is Mode 1, which allows continuous operation, while Mode 2 activates a motion control that saves battery. Choose the mode that best meets your needs.

MODE*123456*1

MODE*123456*2

Mode 2 disables the tracker after 5 minutes of inactivity.

6. Upload Interval Setting

The upload interval determines how often the tracker will send data. The time can be adjusted between 30 and 999 seconds, with 30 being the factory default. Use the command below to set the desired interval.

INTERVAL*123456*60

Special commands

7. Special Commands

There are special commands that allow you to query and manage the tracker more efficiently. The commands below can be used to check settings, restart the device, and keep the tracker online.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456

FACTORY*123456