Installation Manual for Suntech: T3

Installing the Suntech: T3 GPS is an essential process to ensure the correct and efficient operation of the device. In this manual, we will cover the main aspects of physical installation, including the ideal position for the GPS, connecting the power supply, inserting the SIM card, and checking the system after installation.

First, it is crucial to choose an appropriate location for the installation of the T3, which should be protected from interference and obstructions that may affect the signal. The power supply must be securely connected, following the manufacturer's specifications to avoid damaging the device. Additionally, inserting the SIM card requires attention, as it is fundamental for the GPS communication with the tracking platform.

After installation, it is recommended to conduct a complete system check to ensure that all connections are secure and that the device is operating as expected. Proper installation of the Suntech: T3 not only maximizes tracking efficiency but also ensures the safety and integrity of the monitored vehicle.

Finally, for a complete and hassle-free tracking experience, consider the Trackar platform, which offers a one-time payment and advanced features for managing your fleet.

SMS Commands

2. Network Parameter Configuration

Below are the commands to configure the network parameters of the tracker. Choose the appropriate server according to the chip carrier. Correct configuration is crucial for the proper functioning of the tracker.

ST300NTW;XXXXXXXXX;02;0;smart.m2m.vivo.com.br;vivo;vivo;central.trackar.com.br;6011;central.trackar.com.br;6011;0;0

ST300NTW;XXXXXXXXX;02;0;hinova.br;vivo;vivo;central.trackar.com.br;6011;central.trackar.com.br;6011;0;0

ST300NTW;XXXXXXXXX;02;0;transmeet.br;transmeet;transmeet;central.trackar.com.br;6011;central.trackar.com.br;6011;0;0

Check if the network information is correct and up to date.

3. Sending and Event Parameters

These commands are specific for configuring the data sending frequencies and events of the tracker. The choice between the settings for car or motorcycle should be made based on the type of vehicle being monitored.

ST300RPT;XXXXXXXXX;02;3300;60;60;3;300;300;0;0;0

ST300EVT;XXXXXXXXX;02;0;10;0;12;11;9;30;30;0;0;7;1;1;0;0;0;0;0;0;9;9;0;0;0

Incorrect adjustments may affect the efficiency of the tracker.

4. Battery and Sensor Settings

The following commands are used to optimize battery usage and configure the sensors of the tracker. Energy efficiency is essential to ensure prolonged operation of the device.

ST300BAT;XXXXXXXXX;02;0;3.4

ST300CMD;XXXXXXXXX;02;ImproveBatteryLife=1

Proper battery maintenance prolongs the lifespan of the tracker.

Special commands

1. Reset and Configuration Commands

The following commands are used to restore factory settings and make adjustments to the module. It is important to replace 'XXXXXXXXX' with the last 9 digits of the device's IMEI, as indicated. The commands vary according to the carrier of the chip used.

ST300CMD;XXXXXXXXX;02;Reset

ST300CMD;XXXXXXXXX;02;EraseAll

ST300CMD;XXXXXXXXX;02;Reboot

Make sure the device is connected to the network before executing the commands. ### 5. Special Commands

These commands are used for additional functions, such as requesting the position of the tracker or setting the odometer. Use them as needed to manage the device.

ST300CMD;XXXXXXXXX;02;StatusReq

ST300CMD;XXXXXXXXX;02;Preset

ST300CMD;XXXXXXXXX;02;SetOdometer=XXXXXXXXX000

Make sure the tracker is properly configured before sending special commands.