Suntech ST910 Installation Manual

Introduction to the Suntech ST910 Installation Manual

The Suntech ST910 is an advanced GPS tracking device designed to provide efficient and accurate monitoring solutions. To ensure the optimized functioning of your device, it is essential to correctly follow the physical installation guidelines. In this section, we will address crucial aspects such as the ideal GPS position, necessary power supply, chip installation, and the steps to verify the device's operation.

The GPS position should be chosen carefully, ensuring that the signal is captured clearly and without obstructions. The power supply must be provided according to the manufacturer's specifications, ensuring that the device operates continuously and reliably. Chip installation is an important step that requires attention, as a properly installed chip is vital for the device's communication with the network.

After installation, verifying the operation of the Suntech ST910 is essential to ensure that all functionalities are operational. With a proper installation process, you will be able to enjoy all the advantages that tracking technology offers.

To further optimize your experience, consider the Trackar platform, which offers a tracking system with a one-time payment, ensuring practicality and efficiency in managing your device.

SMS Commands

1. Time Zone Configuration

The first essential step is to adjust the device's time zone. This adjustment ensures that location and time data are correct according to your region.

8960000w00

2. Update Time Configuration with Ignition On

Set the transmission time interval while the vehicle is in motion or with the ignition on. The time can be adjusted in seconds, allowing for more frequent monitoring.

8050000 60

60 seconds is the standard interval.

3. Update Time Configuration with Ignition Off

It is also important to configure the transmission interval when the ignition is off. This adjustment helps to save battery and data.

8090000 3300

3300 seconds is equivalent to 55 minutes.

4. Carrier APN Configuration

The APN configuration is crucial for the tracker to function. Make sure to enter the correct information according to the carrier of the chip used.

8030000 allcom.br

8030000 allcom.vivo.com.br

8030000 brt.br

8030000 claro.com.br

8030000 conect.algar.br

8030000 datatem.algar.br

8030000 eseye.com

8030000 gprs.amazoniacelular.com.br

8030000 gprs.oi.com.br

8030000 gprs.telemigcelular.com.br

8030000 jbgprs.algar.br

8030000 linksolutions.br

8030000 m2data.algar.br

8030000 m2data.arqia.br

8030000 m2data.vivo.com.br

8030000 m2m.vodafone.br

8030000 m2track.br,vivo,vivo#

8030000 meta.vivo.com.br

8030000 oktor.br

8030000 sercomtel.com.br

8030000 smart.m2m.vivo.com.br

8030000 ss.algar.br

8030000 tim.br

8030000 tmdata.tim.br

8030000 transmeet.br

8030000 up.m2m.vivo.com.br

8030000 virtueyes.vivo.com.br

8030000 voxter.algar.br

8030000 voxter.br

8030000 wap.ctbc.br

8030000 wl.vivo.com.br

8030000 y1.m2m.algar.com.br

8030000 zap.vivo.com.br

5. Activate GPRS Transmission

Activate GPRS transmission to ensure that the tracker can send and receive data correctly.

7100000

6. DNS and Port Configuration

Configuring the DNS and server port is essential for the communication of the tracker with the tracking server.

8040000 central.trackar.com.br,5011

7. Enable Movement Alert Without Key Post

Enable the movement alert without the need for a key post, adjusting the activation time in minutes.

1810000T180

Special commands

Special Commands

Below are some special commands that can be used to manage the tracker.

rconf

Restart

Sleep0000 5

9400000

9410000

6690000

SLEEP0000 10

Reset

format