Suntech ST900 Installation Manual

Introduction to the Suntech ST900 Installation Manual

The Suntech ST900 model is an advanced GPS tracking solution designed to provide accuracy and reliability in locating vehicles and assets. To ensure the proper functioning of the device, it is essential to follow the physical installation guidelines, which include choosing the ideal position for the GPS, correctly connecting to the power source, installing the SIM chip, and verifying the operation of the equipment.

The GPS position should be carefully selected, avoiding areas with obstructions that may interfere with the signal. The power supply should be securely connected, ensuring that the device receives the necessary energy to operate continuously. Additionally, installing the chip is a crucial step, as it allows the device to communicate with the tracking platform.

After installation, it is essential to conduct a thorough check to ensure that the Suntech ST900 is functioning correctly. This includes testing signal reception and tracking accuracy. To maximize the efficiency of your tracker, consider integrating the device with the Trackar platform, which offers a one-time payment solution, facilitating the management and monitoring of your assets in a practical and efficient manner.

SMS Commands

1. Time Zone Configuration

The first step is to adjust the device's time zone. This setting is crucial to ensure that location data is accurate and synchronized with local time.

8960000w00

2. Update with Ignition On

Set the transmission interval when the vehicle is moving or with the ignition on. The time can be adjusted in seconds, with 60 seconds being the default.

8050000 60

3. Update with Ignition Off

Set the transmission interval for when the ignition is off or the vehicle is stationary. The default is 3300 seconds, equivalent to 55 minutes.

8090000 3300

4. Carrier APN Configuration

It is essential to enter the correct APN, username, and password information, as these details vary according to the chip provider and the carrier used. Below are the available APNs.

8030000 allcom.br

8030000 allcom.vivo.com.br

8030000 brt.br

8030000 claro.com.br

8030000 conect.algar.br

8030000 datatem.algar.br

8030000 eseye.com

8030000 gprs.amazoniacelular.com.br

8030000 gprs.oi.com.br

8030000 gprs.telemigcelular.com.br

8030000 jbgprs.algar.br

8030000 linksolutions.br

8030000 m2data.algar.br

8030000 m2data.arqia.br

8030000 m2data.vivo.com.br

8030000 m2m.vodafone.br

8030000 m2track.br,vivo,vivo#

8030000 meta.vivo.com.br

8030000 oktor.br

8030000 sercomtel.com.br

8030000 smart.m2m.vivo.com.br

8030000 ss.algar.br

8030000 tim.br

8030000 tmdata.tim.br

8030000 transmeet.br

8030000 up.m2m.vivo.com.br

8030000 virtueyes.vivo.com.br

8030000 voxter.algar.br nlt nlt

8030000 voxter.br

8030000 wap.ctbc.br

8030000 wl.vivo.com.br

8030000 y1.m2m.algar.com.br

8030000 zap.vivo.com.br

5. Activate GPRS Transmission

For the tracker to function correctly, it is necessary to activate GPRS transmission. This command is essential for device communication.

7100000

6. Configure DNS and Port

It is important to configure the DNS and port to ensure proper communication with the server. The recommended servers are as follows.

8040000 central.trackar.com.br,5011

7. Activate Motion Alert

This command allows you to activate the motion alert without the key post, adjusting the time in minutes as needed.

1810000T180

Special commands

8. Special Commands

Here are some special commands that can be used to manage the tracker.

rconf

Restart

Sleep0000 5

9400000

9410000

6690000

SLEEP0000 10

Reset

format