Suntech ST215I Installation Manual

The Suntech ST215I GPS is an advanced solution for vehicle monitoring, providing security and real-time tracking. This manual is designed to guide you through the physical installation of the device, ensuring that all steps are followed correctly for optimal performance.

The first step is to choose the ideal position for the GPS. The location should be discreet, protected from impacts, and have good visibility for the GPS signal. Next, it is crucial to connect to the power source; ensure that the installation complies with the manufacturer's specifications to avoid operational failures.

After powering up, insert the SIM card into the device, ensuring that it is activated and has an appropriate data plan. Finally, check that all connections are secure and that the device is functioning correctly. Proper installation of the Suntech ST215I is essential to make the most of its features.

For efficient monitoring, consider integrating your installation with the Trackar platform, which offers an accessible tracking system with a one-time payment. Keep your vehicle protected and under control!

SMS Commands

1. Time Zone Configuration

The first crucial step in setting up the GPS tracker is the correct definition of the time zone. This ensures that all location and time data are synchronized with local reality.

8960000w00

2. Update Interval with Ignition On

It is important to adjust the update time for when the vehicle's ignition is on. The interval can be set to send data every 60 seconds, which is ideal for real-time monitoring while the vehicle is in motion.

8050000 60

3. Update Interval with Ignition Off

When the ignition is off, the tracker can be configured to send data at a longer interval, such as every 3300 seconds (55 minutes). This helps save battery when the vehicle is not in use.

8090000 3300

4. Carrier APN Configuration

Configuring the APN (Access Point Name) is essential for the tracker to connect to the carrier's network. Each carrier has its own settings, which must be entered correctly to ensure communication.

8030000 allcom.br

8030000 allcom.vivo.com.br

8030000 brt.br

8030000 claro.com.br

8030000 conect.algar.br

8030000 datatem.algar.br

8030000 eseye.com

8030000 gprs.amazoniacelular.com.br

8030000 gprs.oi.com.br

8030000 gprs.telemigcelular.com.br

8030000 jbgprs.algar.br

8030000 linksolutions.br

8030000 m2data.algar.br

8030000 m2data.arqia.br

8030000 m2data.vivo.com.br

8030000 m2m.vodafone.br

8030000 m2track.br,vivo,vivo#

8030000 meta.vivo.com.br

8030000 oktor.br

8030000 sercomtel.com.br

8030000 smart.m2m.vivo.com.br

8030000 ss.algar.br

8030000 tim.br

8030000 tmdata.tim.br

8030000 transmeet.br

8030000 up.m2m.vivo.com.br

8030000 virtueyes.vivo.com.br

8030000 voxter.algar.br nlt nlt

8030000 voxter.br

8030000 wap.ctbc.br

8030000 wl.vivo.com.br

8030000 y1.m2m.algar.com.br

8030000 zap.vivo.com.br

Make sure to use the correct information from your carrier.

5. Activate GPRS Transmission

For the tracker to function properly, it is necessary to activate GPRS transmission. This configuration allows the device to send and receive data over the network.

7100000

6. DNS and Port Configuration

Configuring the DNS and port is fundamental to ensure that the tracker connects to the correct server. It is recommended to configure three servers for redundancy.

8040000 central.trackar.com.br,5011

7. Activate Movement Alert Without Key Post

This configuration allows you to adjust the time the tracker waits before sending a movement alert. The time can be adjusted in minutes, providing flexibility in monitoring.

1810000T180

Special commands

Special Commands

These commands offer additional functionalities for the tracker, allowing for quick queries and adjustments.

rconf

Restart

Sleep0000 5

9400000

9410000

6690000

SLEEP0000 10

Reset

format