Suntech ST215E Installation Manual

Introduction to the Suntech ST215E Installation Manual

The Suntech ST215E model is an advanced solution for vehicle tracking, offering precision and reliability. To ensure optimal performance of your device, it is crucial to follow the physical installation steps correctly. In this section, we will address the main aspects, such as the correct position of the GPS, power connection, SIM chip installation, and system verification after installation.

The choice of GPS position should consider the best signal reception, avoiding obstructions that may interfere with communication. The device's power supply should be done safely and efficiently, ensuring that it operates without interruptions. The SIM chip should be installed according to the manufacturer's instructions, ensuring that the device can connect to the tracking network. After installation, it is essential to conduct a complete system check, ensuring that all functions are operational and that the device is ready for use.

To optimize your tracking experience, consider exploring the Trackar platform, which offers a one-time payment and robust features to manage your assets efficiently. Make the most of your Suntech ST215E with the ideal solution for your tracking needs.

SMS Commands

1. Time Zone Configuration

To begin configuring the tracker, it is essential to adjust the time zone. This ensures that all location and time information is accurate.

8960000w00

2. Update Time Adjustment with Ignition On

The update time is the interval at which the tracker will send data while the ignition is on or the vehicle is in motion. The interval is adjustable in seconds.

8050000 60

60 seconds is the recommended standard for best results.

3. Update Time Adjustment with Ignition Off

Similar to the previous adjustment, but this applies when the ignition is off. The default interval is 3300 seconds, which is equivalent to 55 minutes.

8090000 3300

4. Carrier APN Configuration

Configuring the APN is crucial for the tracker to function. The information must be updated according to the carrier used, as it varies between different providers.

8030000 allcom.br

8030000 allcom.vivo.com.br

8030000 brt.br

8030000 claro.com.br

8030000 conect.algar.br

8030000 datatem.algar.br

8030000 eseye.com

8030000 gprs.amazoniacelular.com.br

8030000 gprs.oi.com.br

8030000 gprs.telemigcelular.com.br

8030000 jbgprs.algar.br

8030000 linksolutions.br

8030000 m2data.algar.br

8030000 m2data.arqia.br

8030000 m2data.vivo.com.br

8030000 m2m.vodafone.br

8030000 m2track.br,vivo,vivo#

8030000 meta.vivo.com.br

8030000 oktor.br

8030000 sercomtel.com.br

8030000 smart.m2m.vivo.com.br

8030000 ss.algar.br

8030000 tim.br

8030000 tmdata.tim.br

8030000 transmeet.br

8030000 up.m2m.vivo.com.br

8030000 virtueyes.vivo.com.br

8030000 voxter.algar.br

8030000 voxter.br

8030000 wap.ctbc.br

8030000 wl.vivo.com.br

8030000 y1.m2m.algar.com.br

8030000 zap.vivo.com.br

5. GPRS Transmission Activation

For the tracker to function correctly, it is necessary to activate GPRS transmission. This allows communication between the device and the tracking center.

7100000

6. DNS and Port Configuration

Correctly configuring the DNS and port is essential to ensure that the tracker connects to the tracking servers. It is important to enter the server details correctly.

8040000 central.trackar.com.br,5011

7. Movement Alert Activation Without Key On

This setting allows you to adjust the movement alert time, even when the vehicle does not have the key in the ignition. The time is customizable in minutes.

1810000T180

Special commands

Special Commands

Here are some additional commands that can be used to manage and query the tracker.

rconf

Restart

Sleep0000 5

9400000

9410000

6690000

SLEEP0000 10

Reset

format

These commands can be used to restart the tracker, change settings, and obtain the location.