Installation manual for Suntech ST210

Introduction to the Suntech ST210 Installation Manual

Welcome to the installation manual for the Suntech ST210 GPS. This device is a robust and efficient solution for vehicle monitoring, offering precision and reliability. In this section, we will address the physical installation of your GPS, which is crucial for its proper functioning.

The first step is to choose the ideal position for the GPS. The Suntech ST210 should be installed in a location that minimizes obstructions, ensuring optimized signal reception. Make sure the device has a clear view of the sky, as this is essential for the system's performance.

Next, the power supply for the GPS should be done according to the manufacturer's specifications. Ensure that the wires are connected correctly, providing a stable and safe power source. Additionally, installing the SIM card is an important step; it must be inserted correctly for the device to operate without interruptions.

Finally, after installation, it is essential to perform a complete system check. Test the connectivity and tracking accuracy to ensure everything is functioning as expected.

For even more effective monitoring, consider using the Trackar platform, which offers a one-time payment and a user-friendly interface to track your vehicle in real time.

SMS Commands

1. Time Zone Configuration

The first step is to adjust the device's time zone. It is essential that this setting is correct to ensure that location data is transmitted accurately.

8960000w00

2. Update Time with Ignition On

The second step involves setting the update time while the vehicle's ignition is on. The transmission interval can be adjusted in seconds, allowing the tracker to send data in real-time while the vehicle is in use.

8050000 60

60 seconds is the standard interval during movement.

3. Update Time with Ignition Off

Here, the goal is to configure the update time when the ignition is off. This setting is important to save battery and data when the vehicle is not in use.

8090000 3300

3300 seconds corresponds to a 55-minute interval.

4. Carrier APN Configuration

At this stage, it is crucial to correctly enter the APN information, along with the username and password, according to the specifications of the chip carrier used. This ensures the connectivity of the tracker to the network.

8030000 allcom.br

8030000 allcom.vivo.com.br

8030000 brt.br

8030000 claro.com.br

8030000 conect.algar.br

8030000 datatem.algar.br

8030000 eseye.com

8030000 gprs.amazoniacelular.com.br

8030000 gprs.oi.com.br

8030000 gprs.telemigcelular.com.br

8030000 jbgprs.algar.br

8030000 linksolutions.br

8030000 m2data.algar.br

8030000 m2data.arqia.br

8030000 m2data.vivo.com.br

8030000 m2m.vodafone.br

8030000 m2track.br,vivo,vivo#

8030000 meta.vivo.com.br

8030000 oktor.br

8030000 sercomtel.com.br

8030000 smart.m2m.vivo.com.br

8030000 ss.algar.br

8030000 tim.br

8030000 tmdata.tim.br

8030000 transmeet.br

8030000 up.m2m.vivo.com.br

8030000 virtueyes.vivo.com.br

8030000 voxter.algar.br nlt nlt

8030000 voxter.br

8030000 wap.ctbc.br

8030000 wl.vivo.com.br

8030000 y1.m2m.algar.com.br

8030000 zap.vivo.com.br

Make sure the information is correct for the carrier used.

5. GPRS Transmission Activation

The next step is to activate GPRS transmission, which is essential for communication between the tracker and the server.

7100000

6. DNS and Port Configuration

Here, you must configure the DNS and the port of the server that the tracker will use to send data. This is vital to ensure that the information is transmitted correctly.

8040000 central.trackar.com.br,5011

Three servers can be configured as redundancy.

7. Movement Alert Activation

Finally, you can activate the movement alert, which notifies when the vehicle moves without the ignition key on. This can be adjusted in minutes to meet your needs.

1810000T180

Special commands

Special Commands

In addition to the basic settings, there are special commands that can be used to manage and obtain information from the tracker.

rconf

Restart

Sleep0000 5

9400000

9410000

6690000

SLEEP0000 10

Reset

format

These commands offer additional functionalities, such as restarting the device or obtaining the location.