Suntech ST-902W Installation Manual

Introduction to the Suntech ST-902W Installation Manual

Welcome to the installation manual for the Suntech ST-902W, a GPS tracking device designed to provide security and effective monitoring. This guide will guide you on how to physically install your equipment, ensuring that all functionalities are maximized.

To begin, it is essential to choose the appropriate position for your GPS. Ideally, the Suntech ST-902W should be installed in a location that favors signal reception, away from metallic obstructions that may interfere with communication. Additionally, the power connection should be made carefully, ensuring that the device always has enough power to operate.

Another important point is the insertion of the SIM card. Make sure that the card is properly positioned, as this ensures data transmission to the tracking platform. After installation, do not forget to conduct a complete system check to confirm that everything is functioning correctly.

At the end of this process, you will be ready to enjoy the benefits of real-time tracking. To further optimize your experience, consider using the Trackar platform, which offers a one-time payment service, allowing you to have full control over the location of your vehicle.

SMS Commands

1. Time Zone Configuration

The first essential step is to configure the device's time zone. This ensures that location information is accurate in relation to local time.

8960000w00

2. Update with Ignition On

Set the transmission interval while the ignition is on or the vehicle is in motion. The time can be adjusted as needed.

8050000 60

60 seconds is the default interval.

3. Update with Ignition Off

Adjust the transmission time while the ignition is off or the vehicle is stationary. The interval can be configured to meet your needs.

8090000 3300

3300 seconds corresponds to 55 minutes.

4. Carrier APN Configuration

It is crucial that the APN, username, and password information is entered correctly, as they vary according to the chip carrier used.

8030000 allcom.br

8030000 allcom.vivo.com.br

8030000 brt.br

8030000 claro.com.br

8030000 conect.algar.br

8030000 datatem.algar.br

8030000 eseye.com

8030000 gprs.amazoniacelular.com.br

8030000 gprs.oi.com.br

8030000 gprs.telemigcelular.com.br

8030000 jbgprs.algar.br

8030000 linksolutions.br

8030000 m2data.algar.br

8030000 m2data.arqia.br

8030000 m2data.vivo.com.br

8030000 m2m.vodafone.br

8030000 m2track.br,vivo,vivo#

8030000 meta.vivo.com.br

8030000 oktor.br

8030000 sercomtel.com.br

8030000 smart.m2m.vivo.com.br

8030000 ss.algar.br

8030000 tim.br

8030000 tmdata.tim.br

8030000 transmeet.br

8030000 up.m2m.vivo.com.br

8030000 virtueyes.vivo.com.br

8030000 voxter.algar.br

8030000 voxter.br

8030000 wap.ctbc.br

8030000 wl.vivo.com.br

8030000 y1.m2m.algar.com.br

8030000 zap.vivo.com.br

5. Activate GPRS Transmission

Activate GPRS transmission to ensure the tracker is sending data correctly.

7100000

6. DNS and Port Configuration

Configuring the DNS server and port is necessary for the proper functioning of the tracker. Ensure that the details are correct.

8040000 central.trackar.com.br,5015

7. Enable Motion Alert

Set up the motion alert without the ignition key. The time can be adjusted as needed to suit your preferences.

1810000T180

Special commands

Special Commands

These additional commands are useful for managing and configuring the tracker more efficiently.

rconf

Restart

Sleep0000 5

9400000

9410000

6690000

SLEEP0000 10

Reset

format