MXT T1 Installation Manual
Introduction to the MXT T1 Installation Manual
In this guide, we will cover the physical installation of the MXT T1 GPS, a device designed to provide accuracy and reliability in its locations. Proper installation is essential to ensure the optimal functioning of your equipment. We will start with choosing the GPS position; it is crucial that the device is installed in a location that minimizes obstructions and maximizes signal reception.
Next, we will discuss powering the device, which should be done properly to avoid power failures. Also, check the chip insertion, ensuring that it is correctly positioned for efficient communication of the device. Finally, we will perform a complete check to ensure that all connections are correct and that the MXT T1 is ready for use.
This manual is a valuable tool for you to install your GPS with confidence. Remember to follow each step carefully to achieve the best performance from your MXT T1. For more features and complete management of your device, consider the Trackar platform, which offers a one-time payment and diverse monitoring options.
SMS Commands
1. Carrier APN Configuration
The correct APN configuration is essential to ensure that the tracker functions properly. It is important to replace the APN, username, and password fields with the correct information, as they vary according to the chip provider and carrier. Here are the necessary commands for different servers:
0000,XXXXXXX,2,1,claro.com.br,claro,claro,central.trackar.com.br,5020,central.trackar.com.br,5020
0000,XXXXXXX,2,1,linksolutions.br,link,link,central.trackar.com.br,5020,central.trackar.com.br,5020
0000,XXXXXXX,2,1,smart.m2m.vivo.com.br,vivo,vivo,central.trackar.com.br,5020,central.trackar.com.br,5020
0000,XXXXXXX,2,1,transmeet.br,transmeet,transmeet,central.trackar.com.br,5020,central.trackar.com.br,5020
0000,XXXXXXX,2,1,voxter.br,algar,algar,central.trackar.com.br,5020,central.trackar.com.br,5020
0000,XXXXXXX,2,1,voxter.br,nlt,nlt,central.trackar.com.br,5020,central.trackar.com.br,5020
2. Transmission Interval Definition
The transmission interval should be configured to optimize battery consumption and tracker efficiency. The default is 60 seconds with the ignition on and 55 minutes (3300 seconds) with the ignition off. This configuration can be adjusted as needed.
0000,XXXXXXX,4,60,3300,10,1,5,10
3. Position Request via GPRS
To request the device's position via GPRS, use the corresponding command. This is useful for monitoring the location in real-time.
0000,XXXXXXX,7
After configuration, it is recommended to test the commands to ensure everything is working correctly.
Special commands
4. Special Commands
Here are the special commands that can be used to lock or unlock the device.
0000,XXXXXXX,5,1,0,0
01A633000000002010211021B96904
0000,XXXXXXX,5,0,0,0
01A6330000000020102100987904
Remember to replace 'XXXXXXX' with the last 7 digits of the device ID.
Own your tracking platform with a one-time payment