MXT MXT-142 Installation Manual
Introduction to the MXT-142 Installation Manual
The MXT-142 is an advanced GPS device that offers effective solutions for tracking and monitoring assets. This installation manual has been developed to guide you step by step through the physical setup process of the device, ensuring that you get the maximum performance from your equipment.
The correct installation of the MXT-142 involves paying attention to crucial details, such as the ideal position of the GPS, which should be chosen to ensure the best signal reception. Additionally, the device's power supply must be done safely and efficiently to avoid future problems.
Another important point is the installation of the SIM card, which should be done carefully to ensure connectivity and functionality of the tracker. After completing the installation, it is recommended to perform a complete check of the device to ensure that all components are functioning correctly and that the GPS signal is being transmitted without failures.
By following these guidelines, you will be ready to take advantage of all the features of your MXT-142. For even more efficient management of your assets, consider using the Trackar platform, which offers a one-time payment and robust features to optimize your tracking.
SMS Commands
1. Carrier APN Configuration
The correct APN configuration, along with the username and password, is essential for the proper functioning of the GPS tracker. This information varies according to the chip provider and the carrier used. The settings must be adjusted according to the specific data of each carrier to ensure device connectivity.
0000,XXXXXXX,2,1,claro.com.br,claro,claro,central.trackar.com.br,5087,central.trackar.com.br,5087
0000,XXXXXXX,2,1,linksolutions.br,link,link,central.trackar.com.br,5087,central.trackar.com.br,5087
0000,XXXXXXX,2,1,smart.m2m.vivo.com.br,vivo,vivo,central.trackar.com.br,5087,central.trackar.com.br,5087
0000,XXXXXXX,2,1,transmeet.br,transmeet,transmeet,central.trackar.com.br,5087,central.trackar.com.br,5087
0000,XXXXXXX,2,1,voxter.br,algar,algar,central.trackar.com.br,5087,central.trackar.com.br,5087
0000,XXXXXXX,2,1,voxter.br,nlt,nlt,central.trackar.com.br,5087,central.trackar.com.br,5087
2. Transmission Interval Adjustment
The transmission interval should be set to 60 seconds when the ignition is on and 55 minutes (3300 seconds) when the ignition is off. This setting is crucial for optimizing battery consumption and ensuring tracking efficiency.
0000,XXXXXXX,4,60,3300,10,1,5,10
3. Position Request via GPRS
To request the position of the tracker via GPRS, use the specific command. This functionality is essential for obtaining real-time information about the device's location.
0000,XXXXXXX,7
Complete the recommended settings after sending this command.
5. SMS Commands
SMS commands allow for various configurations and requests. For each command, use the default password and replace the code as necessary.
0000,XXXXXXX,7
Consider the codes provided for each desired action.
Special commands
4. Special Commands
Special commands allow you to perform actions such as locking or unlocking the device. Use with caution.
0000,XXXXXXX,5,1,0,0
01A633000000002010211021B96904
0000,XXXXXXX,5,0,0,0
01A6330000000020102100987904
Own your tracking platform with a one-time payment