MT Topten MT05S Installation Manual

Installing the MT Topten MT05S GPS is an essential process to ensure the proper functioning of the device and accuracy in tracking. To begin, it is important to choose the ideal position for the GPS installation, ensuring that it is located in an area that minimizes interference and maximizes signal reception.

Next, the device's power supply must be done safely, using the appropriate power source to avoid damage to the device. Inserting the SIM chip is also a crucial step; ensure that the chip is correctly positioned and that the data plan is active to allow communication.

After the physical installation, it is essential to conduct a complete system check, verifying that all connections are secure and that the GPS is operating as expected. Paying attention to these details can prevent future problems and ensure that you make the most of the features of the MT Topten MT05S.

To manage your tracker conveniently and effectively, consider the Trackar platform, which offers a one-time payment and comprehensive features to optimize your tracking experience.

SMS Commands

1. DNS and Port Configuration

To ensure the proper functioning of the tracker, it is essential to configure the DNS correctly. Use the provided domain for the servers, which are as follows: central.trackar.com.br:6216 for all three servers.

SET URL=central.trackar.com.br:6216

2. Operator APN Configuration

The APN configuration is crucial, as it varies according to the operator and the chip used. It is important to enter the correct APN, username, and password data to ensure the device's connectivity.

SET APN=ALLCOM.BR:ALLCOM:ALLCOM

SET APN=JBGPRS.ALGAR.BR:ALGAR:ALGAR

SET APN=META.COM.BR:VIVO:VIVO

SET APN=SMART.M2M.VIVO.COM.BR:VIVO:VIVO

SET APN=TRANSMEET.BR:TRANSMEET:TRANSMEET

3. Communication Interval with Ignition On

The communication time with the ignition on can be adjusted in seconds, allowing you to set the frequency of data transmission. The default value is 60 seconds.

SET T3 FREQ=060

4. Communication Interval with Ignition Off

Just like the communication interval with the ignition on, this parameter can be adjusted, but in minutes. The default is 55 minutes, which defines the transmission frequency when the vehicle is off.

SET HEARTBEAT=55

These settings are recommended for better performance of the tracker.

Special commands

5. Special Commands

These commands are used for various special functions of the device, such as ignition configuration, locking, and rebooting.

GET NTW

GET INFO

GET PROG

GET LOCATION

SET SLEEP_MODE=1

WAKE_UP

SET IGNITION_DETECTION=0

SET ENGINEV=13200

GET IGNITION_DETECTION

SET RELAY=1

SET RELAY=0

REBOOT