MT MT90 Installation Manual

Introduction to the MT MT90 Installation Manual

The MT MT90 is a GPS tracking device designed to provide security and real-time monitoring. In this manual, we will cover the physical installation of your device, which is crucial to ensure its proper and efficient functioning. The first step is to choose the ideal position for the GPS installation, ensuring that it is placed in a location where it can receive satellite signals without obstructions and is easily accessible for future maintenance.

The device's power supply must be done correctly, using the appropriate power source, to avoid operational failures. Additionally, inserting the SIM card is an important step, as it is through this that the device will connect to the network and send location data. It is essential to check that all components are installed correctly and that the device is functioning as expected.

By following these guidelines, you will ensure that your MT MT90 is ready to provide accurate information about the desired location. For a complete monitoring and tracking experience, consider using the Trackar platform, which offers a one-time payment and advanced features to manage your trackers conveniently and efficiently.

SMS Commands

2. APN Configuration

The APN configuration is crucial for the device's operation. Ensure that the APN, username, and password information are correct, as they vary according to the carrier and the chip used.

SET APN=ALLCOM.BR:ALLCOM:ALLCOM

SET APN=JBGPRS.ALGAR.BR:ALGAR:ALGAR

SET APN=META.COM.BR:VIVO:VIVO

SET APN=SMART.M2M.VIVO.COM.BR:VIVO:VIVO

SET APN=TRANSMEET.BR:TRANSMEET:TRANSMEET

3. Communication Time Configuration with Ignition On

The communication time with the ignition on can be adjusted in seconds. This parameter controls the frequency of data transmission while the vehicle is running.

SET T3 FREQ=060

4. Communication Time Configuration with Ignition Off

Just like with the ignition on, the communication time with the ignition off is adjustable, but in minutes. This interval determines the transmission frequency when the vehicle is stationary.

SET HEARTBEAT=55

Adjust this time as necessary to optimize battery consumption.

Special commands

1. Server Configuration

To ensure proper communication of the tracker, it is essential to configure the DNS and port correctly. Use the recommended domain to avoid connectivity issues.

SET URL=central.trackar.com.br:6216

SET URL=central.trackar.com.br:6216 ### 5. Special Commands

There are special commands that can be used to manage the device settings and obtain important information.

GET NTW

GET INFO

GET PROG

GET LOCATION

SET SLEEP_MODE=1

WAKE_UP

SET IGNITION_DETECTION=0

SET ENGINEV=13200

GET IGNITION_DETECTION

SET RELAY=1

SET RELAY=0

REBOOT

Use these commands with caution, as they can directly affect the operation of the tracker.