Installation Manual for MT MT2000
Introduction to the Installation Manual for the MT MT2000
Welcome to the installation manual for the MT MT2000, a GPS tracking device designed to offer precision and reliability in your monitoring operations. In this guide, we will cover the necessary steps for the physical installation of your device, ensuring that you can make the most of all its functionalities.
Proper installation of the MT2000 begins with choosing the ideal position for the GPS. It is crucial that the device is positioned to avoid obstructions, ensuring optimized signal reception. Additionally, the power supply to the device should be done securely and efficiently, ensuring that the MT2000 is always ready to operate.
Another important point is the insertion of the SIM card, which should be done according to the manufacturer's instructions. After the physical installation, it is recommended to perform a complete check of the device to ensure that all connections are secure and that it is functioning as expected.
Once the installation is complete, you will be ready to monitor your activities with the Trackar platform, which offers a one-time payment service and efficient management. Make the most of the MT MT2000 technology and stay connected to what matters most to you.
SMS Commands
4. APN Configuration
To configure the carrier's APN, use the following format, where you should enter your access credentials.
SET APN=APN:USUĂRIO:SENHA
Special commands
1. Initial Configuration of Trackers
The initial configuration of the tracker is crucial and varies according to the server used. It is essential to follow the specific instructions to ensure the proper functioning of the device.
Make sure to use the correct command according to the server you are configuring. ### 2. SP Server
For users of the SP server, the command to be sent is specific to ensure the correct connection of the device.
SET URL=dns.central.trackar.com.br:6216
### 3. AL Server
If you are using the AL server, use the appropriate command to ensure the communication of the tracker.
SET URL=ese.central.trackar.com.br:6216
### 5. Transmission Interval
Set the data transmission interval of the tracker. The example below configures a 30-second interval.
SET T3 FREQ=030
### 6. Additional Commands
There are additional commands that can be used to manage the device efficiently.
REBOOT
GET LOCATION
SET RELAY=1
SET RELAY=0
Use REBOOT to restart the device, GET LOCATION to obtain the current position, SET RELAY=1 to lock and SET RELAY=0 to unlock.
Own your tracking platform with a one-time payment