Jimi NT201 Installation Manual

Introduction to the Jimi NT201 Installation Manual

The Jimi NT201 is an advanced GPS tracking device designed to provide precise and real-time monitoring. To ensure optimal performance of your GPS, it is essential to follow the physical installation steps correctly. In this section, we will address crucial aspects such as the proper positioning of the GPS, power supply, SIM chip installation, and checking the device's functionality.

Choosing the location for the Jimi NT201 is essential to maximize GPS signal reception. It is recommended to install it in a high location free of obstructions, avoiding areas with metallic interference. Regarding power supply, make sure to use the correct source to avoid damaging the device. The SIM chip installation should be done carefully, ensuring it is well seated and that the data plan is active.

After installation, it is important to verify the functionality of the Jimi NT201 to confirm that everything is operating as expected. Follow the detailed instructions in the rest of this manual to optimize your usage.

For even more efficient management of your tracker, consider using the Trackar platform, which offers a one-time payment and advanced features to facilitate monitoring your operations.

SMS Commands

1. Time Zone Configuration

Adjusting the time zone is essential to ensure that the tracker functions correctly. Use the specified command to set the desired time zone.

GMT,W,0#

2. Position Configuration by Angle

It is possible to set the position of the tracker based on a specific angle. The default value for curve points is 30°, but you can disable it by setting the value to 0.

BEND,1,30#

3. Transmission Time in Motion

The transmission time while the device is in motion can be adjusted. The default is 60 seconds, but you can modify this time as needed.

TIMER,60#

4. Transmission Time Stopped

Just like the movement time, the transmission time when the device is stopped can also be modified. The default is 55 minutes.

STATIC,55#

5. Emergency Time

Set the time in which the tracker should send the location in case of a power cut. The default is 10 seconds.

EMERG,10#

6. Accelerometer Sensitivity

The sensitivity of the accelerometer can be adjusted on a scale from 1 to 5, where 1 is the most sensitive. Adjust according to monitoring needs.

VIBRATION,3#

7. Communication Protocol

Configure the communication protocol of the tracker to ensure correct data transmission.

SETLOCX12#

8. DNS and Port Configuration

It is necessary to configure the DNS server and port so that the tracker can connect correctly to the platform.

SERVER,8520,central.trackar.com.br,5013#

9. Carrier APN Configuration

The APN configuration is crucial for the tracker to function. APN, username, and password information must be updated according to the carrier used.

APN,ALLCOM.ALGAR.BR,ALLCOM,ALLCOM#

APN,ALLCOM.BR,ALLCOM,ALLCOM#

APN,ALLCOM.VIVO.COM.BR,ALLCOM,ALLCOM#

APN,CLARO.COM.BR,CLARO,CLARO#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR,ARQIA,ARQIA#

APN,JBGPRS.BR,ARQIA,ARQIA#

APN,KORE.BR,KORE,KORE#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR,ALGAR,ALGAR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR,VODAFONE,VODAFONE#

APN,OKTOR.BR,OKTOR,OKTOR#

APN,POWERTECH,ALGAR,1212#

APN,SMART.M2M.VIVO.COM.BR,VIVO,VIVO#

APN,SS.ALGAR.BR,ALGAR,ALGAR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR,TRANSMEET,TRANSMEET#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR,VIVO,VIVO#

APN.BRT.BR#

APN.META.VIVO.COM.BR,META,META#

APN.NLT.COM.BR,NLT,NLT#

10. Force Position Communication

If necessary, you can force the tracker to send its position immediately. Use the appropriate command for this.

123

It is recommended to perform these configurations to ensure optimal device operation.

Special commands

1. Special Commands

Special commands allow for more advanced management of the device. Use them with caution.

DYD,000000#

HFYD,000000#

RESET#

CLRG#

PARAM#

STATUS#

ACCVIRTON#

ACCVIRTOFF#

YSJ010#

GPS#

HBT,1#

URL#

WAKE,1#

SLEEP,5#

SLPON#

SLPOFF#

POWER1#

POWER0#

RELAY,1#

RELAY,0#

FACTORY#

Make sure your device is updated to use some of these features.